causing

Hi All, My dealer installed EE radiator braces on my '09 FE590. While riding an event on the weekend I noticed I had a coolant leak coming from the top area of the rads. Turns out the T-shaped radiator hose that runs between the two radiators and runs through the frame is 1/4-3/8 of inch...

Hi all, over the weekend I did the valve clearances and changed the plug on my FX650e (in supermoto trim with full Doma system). I thought I would treat her to an Iridium plug as I have used these before on my 2 stroke bikes with great success. Took her for a blast and I get a missfire when on...

I've got a 98 FC501. It won't start after running for 20 minutes and I thought it was the magneto, valves or other things. But it does start after sitting for a couple days (4-6 kicks). . It appears the plug is oily and wet and black. The carb settings are probably not well tuned and the...

Hi all, Since installing the new follower bearings and new cam chain the starter struggles to turn the motor over. I first thought the valve clearances had loosened due to settling in etc but ther're OK, the only thing that I can think is that the (slightly) different valve timing due to the...