carburetor

My carb overflow hose drips fuel after ive tried to kickstart my bike for a few times. Float height should be fine (@45 degrees the float is parallel with the gasket surface and moves effortlessly), jets should all be fine (blew compressed air in to all of them) My air/fuel screw is turned 1,5...

hello what to do on the dellorto 38 husaberg 400 FE carburetor to make it easier to start the bike. the scooter of the motorcycle doesn’t wear as much as the needle

Suggested carburetor for 98 600E ?

Carb inlet to AF boot, part # 80006026100 Part # 80006026100 boot connects the carburetor inlet to the air filter flange. KTM has discontinued the part. It fits my 2007 FE550E. Does anyone know of a boot that fits properly as a replacement? Thanks.

Carburetor Tuning Calculation Chart For FCR, CRS, PKW, PJ, PE For carbureted Husaberg motorcycles

I picked up a 94 FE350 in the spring, and just got around to it today, try to make it run. So after a few kicks no success, found that the float valve was sticking, also need to replace the fuel lines and the fuel pump lines. Other than that just one thing. It needs a Carburetor Boot...

Good afternoon my friends! I'm writing to ask about something. I have an Mikuni Corp 40 carburetor in my husaberg fe600, im going to buy FCR39, Mikuni is propably one of the problems with my husaberg. Everyday i have to kick it few times <in good moments, generaly it take 10-15 mins - hundreds...

I got my bike running today which was exciting. This is the first time I have heard it run and is likely the first time it has run in years. However, I could only keep it running for about 5 seconds before it would die and some fuel was leaking out of the fuel bowl. The bike has a Dellorto...

I Installed a Keihin 41 mm on my 97 FE 600. This Carb made me really happy, one kick and it starts hot and cold. But i have one problem, I can not get it to fit air tight because i have a alu holder on the intake with a rubber boot around it which keeps getting loose. Now i am looking for a...

Hey guys, I'm new to the forums but not to bikes or cars. Just to give you some background information, I'm a mechanic for a living and a mechanical engineering student. I'm not a carburetor expert as us new automotive guys are never trained to work on them, but I've gotten pretty familiar...

Hi everyone, My ride is a 06 FE450e. I was wondering if there is any special procedure to remove the carburetor. I t seems really difficult to take it out. Thanks for your help.

Hello Husaberg freaks, this is doctorcorey looking for a little help in identifying the carb that came on my 96 fe600(I bought the bike new in 2000). Just a note first, however, that when started with this carb, the engine would blow out stinking black smoke. This was not a stuck choke, wrong...