caps

Hey all, I was pressure testing my coolant system and found that my rad cap was not holding pressure. It bled out through the overflow almost immediately as I was adding pressure. I bought a new 1.4 bar cap and it’s doing the same thing. Anything above 5 PSI (.34 Bar) or so and it purges...

I've got an 09 FE450 that needs a new spark plug cap. The current cap shows infinite resistance. I was hoping to ride this weekend. So I go down to the local KTM/Husaberg dealer, Carter Powersports in Las Vegas. They do not have any caps. They do not stock the caps. There are no...

anyone had cause to break apart a pre-load cap? I need to dismantle the last part of this pre-load cap and I'm left with rebound pin looking at me. I can see two slots down the side at 180 degrees apart. regards Taffy

I went with the heaviest rear spring ( :idea: ) and found the preload on my forks now to be a bit on the light side, I'm 2 off for compression now......I use plastic wire straps as gauges and have found I'm using the last 3/4's of the travel...... soooo I was lookin at the KTM adjustable fork...

:) I know there out there ,need help finding part # ,would like to order a set for my 02 501 fe thanks for all the help .