capacity

Hi just wondering if anyone could help me I’ve got a husaberg te 300 2013. With wp closed cartridge forks. I done a hare and hounds and blow a seal. I’m happy to replace the seal and I know the capacity is 607ml but would anyone be able to tell me how much in the bottom and top of the cartridge...

Hi everybody, I hava stupid question :eek: : I recently bought a used FE 450 (MY 2012) and I am not quite sure how to check the oil level as I have a round oil glass but In the manual is only the oval one mentioned. :eek: - So how high should the oil level be in the glass? - And do...

Hello, i just bought FC 501 +- 98year (still dont know about capacity of this engine, im looking for diffrences between 501/600ccm3) and here is a question: I have 82 link chain inside, so it's a 600cmm3? or 501 with chain from 600? (i tink its not possible to put 78 link inside. But i need...

Since my clutch cover needs replacing i thought of getting a rekluse clutch cover, but not the rekluse clutch which I don't like at all.... anyway it would increase my oil capacity and hence my 570 could venture further without the need of replacing oil. In theory... Anyone tried this? How much...

What would be the correct amount of oil and sight glass level after a nut and bolt rebuild on a 2004 650? Many thanks

For anyone interested, yesterday I ran my bike until it ran out of fuel. I could still see fuel in the subframe, but not much. Whatever quantity that was, is unuseable. I was about a mile from the truck, and borrowed about 14 ounces of gas from a buddy. That would be one Keystone light beer can...

what is the motor oil capacity of a fs570?

Greetings all, I have been in contact with a company that is considering the production of a larger aftermarket fuel tank for the 2009 model bike. This company, not Clarke, is mainly interested in what size fuel tank, but, I thought I would try and gather the info as to about how many would...

E-mail from Clarke Manufacturing: From: "Clarke Manufacturing" <[email protected]> Add to Address Book Add Mobile Alert Subject: Re: Husaberg tanks Date: Tue, 16 Jan 2007 06:59:55 -0800 Eric We are doing tanks for the Husaberg and hoping to start selling them within a few...

I'd really like to get a FS650 for street riding, but I would *really* need atleast a 3.5 gallon capacity. I understand that there are no aftermarket tanks available for the Husa's. What are my options? I've read some posts already.... How much capacity can I get with heat gunning the stock...

has anyone measured the actual capacity of an 06 tank spec says 9L =2.38Gallons a person told me the tank actually holds 11L=2.91Gallons what is the truth Thanks VIKING

I just finished talking with IMS regarding how many commitments they need to manufacture an oversize tank for a particular bike. I saw an ad where the listed a tank for the Huskies, so I thought they may be interested in making a mold for the Husabergs. They require a minumum order of 100 tanks...

My question is a easy one i think . I have a 98 FE 600 which has a cheese head screw below the oil filler opening , which indicates MIN . I presume this is the lowest oil level the engine can run on . Is it save to run at this level or below , which i have on several times having been lost in...