caliper

Hello everyone. I am brand new to this forum. I'm in a pinch and need help. I need to replace the front brake caliper and brake line on a 2011 FS570. I tried to buy the OEM replacement but the part is no longer available. Our caliper has a hole in it. We tried to repair it but it's not...

Trying to put some new pads on my rear calipers but it seems to be completely stuck on the support pins. Trying to pump them out but they just arent budging. Am I missing something? There is so much difference between the new and old pads that theres not enough cap between caliper support and...

Hello Has anyone manage to buy a new rear brake caliper only without the brake caliper support...looks like you can buy the support on its own but not the caliper Also does anyone know what other models/manufacturers that is compatible..can’t find a part number on the caliper unless it’s...

Hey, I'm looking for Beringer/FTE caliper 4 piston, radial 100mm mount, BLUE or BLACK or 6 piston, axial 95mm mount, BLUE or BLACK. Send me PM if you got some for sale. Thanks.

Hey guys, I've recently installed a 4 pot beringer caliper, but have the original husaberg brake line and reservoar. they bite ok, but I have no problem pulling the lever all the way in to the handle bar Will just upgraded brake line make it better, or should both line and reservoar get...

I've been searching for 2 weeks and have been through 3 different brackets trying to figure this out and I'm at my wits end. I'm trying to find a 320MM Caliper relocation bracket for my 2009 FE570 so I can use my Supermotowheel. The last one I tried was the an EBC BRK012 but the holes for the...

Whats the easiest way to remove the beringer front brake mount on a 07'650 to transfer to a 08' 550 tube w/brembo mount ? Are the tubes the same ? (I hope !) Think I might just buy the forks, tripple tree & rear shock off this other bike. Dunno if same or not... Thanks in advance---Proflow

Where can I get a front caliper or rebuild kit for my '97 FE501?

(posted in SM forum as well, but seems pretty quiet over there) purchased a support from motostrano for my 2011 FE570 so i can run a 320 rotor up front for street got the new support mounted all up with the brembo caliper. i tried swapping out the oem guide plate (second shot) to the new...

Hi all, purchased a support from motostrano for my 2011 FE570 so i can run a 320 rotor up front for street got the new support mounted all up with the brembo caliper. i tried swapping out the oem guide plate (second shot) to the new support and it seems to push the pads too far down to get...

Hi there, I am willing to replace the OEM magura radial caliper of my FS570 with a brembo (..I already got a 15 rcs mc). I was wondering if the brembo caliper P4 30/34 100 mm motard radial (XA78910) would fit my OEM front wheel and braking rotor, plug and play?. I read offset of the brembo...

I’m having trouble taking my rear break apart on my FE 450 -10 My calipers are no longer floating, one of the metal pins/rubber bushings are stuck. I’ll attach a picture to show where the problem is. What’s the best way to fix this, I cant get it apart…

Does anyone have a front caliper mount to fit a '08 FE450 with 320mm disc that they want to part with?

So . . . I have an FE450 enduro that i want to run on the road in summer Ive bought a nice set of SM wheels and disks ( 320 front ) and the lovely caliper and master cylinder off the 570 SM or KTM equivuilant - but . . ovbiously it wont fit on the standard forkleg type fitting - I was...

hello, my fe650 is currently fitted with supermoto wheels and a 320mm front upgrade, I want to fit some off road wheels, the front caliper looks like it will not fit if i take the extender bracket off? its an 02 bike, will most husaberg or ktm calipers fit. Also i have the chance of some older...

Hey guys, im after a larger caliper for my 310mm disc. Anyone no of anything for sale? Bike is an 07 fe550e. Thanks

One of the caliper guide pins on the rear caliper is bent and is wearing the pads at an angle. I unscrewed it to try and straigten it out, but just mangled the threads. I searched bikebandit.com but the schematic doesnt show the pin as a single unit. It shows it as part of the caliper as a...

anybody know how to free my caliper one of the pins has stuck on me and it wont budge even with a bar , is this a common thing ?

Hello I am looking to buy the Beringer 6 pot supermoto kit for my FE and wonder if people could give me there opinions on which master cylinder is the best match. I would mainly be riding on the road and prefer feel/control over power. I'd still like to be able to hall a stoppie once in a...

Why does Husaberg recommend a 310mm rotor for use with there 6 piston caliper? Every other company uses 320mm rotors and Husaberg also offers a 320mm rotor for use with the stock caliper. Also, will a 17" x5" rear wheel fit in the FE550e swingarm with a 160/60-17 rear tire or do I have to use...