cables

Hi! Wondered if anyone has tried or completed - building completely new wiring set-up on a Berg ? I have a 2008 650, and I am planning to start with this: M-UNIT Blue ! anyone read about it or tried to use it to build a new simpler electrical system...

So is it the Motion Pro 05-0286 that is a few inches longer than the stock cables on my 08' fe450 ? I did a bar riser of 1inch & dont like how tight it is nor do I wish to run them behind the tripples. Brand Motion Pro Model 05-0286 Item Weight 11.2 ounces Product Dimensions 11.5 x 0.3 x 0.3...

Anyone know where to get these?

I've had a load of choke cables made to fit the dell orto carbed bikes. they fit instead of the manual decomp up on the left bar. they are a straight fit and are spot on with 1" risers fitted. priced at 25gbp each. when you know where the sweet spot is they start first time on...

hi currently running a 2003 fs650 fitted with keihin 41mm carb.my question is why do these carbs run with 2 cables ie push/pull.mine only has the one and performs just fine.im thinking of getting a g2 throttle as the one fitted is a very fast action one which in britains slippery winter can be a...

broke a throttle cable yesterday and went to price the husaberg replacement and they are $98!! in comparison, the ktm 350sxf cables are about half the price at $50. does anyone know if they will work on the berg?? they are different part numbers so I have my doubts. I know they both use the...

Hi All, As development from our enduro race team we have now available a Husaberg 4 stroke throttle cable in BLUE with an inline adjuster to allow free play adjustment of throttle without removing the tank! Not only is this product good looking it is 35% cheaper than OEM! We have them available...

Gday Just wondering if there are any after-market throttle cables available? thanks Blunny

I just put a set on my ktm & thought HMMMMMMMM a set would sure be nice on the berg so I got a set & they fit perfect .About 3" longer which allows you to run them thru the triples & in front of the bars ,especially cool if you want to see your dash .I had just installed a vapor & this was a...

The factory heat shrink tubing on my battery cables were not of the highest quality. They have all split and allowed water to get into the cable strands. I cleaned everything up and used an industrial double walled heat shrink tubing on all 6 battery cable ends. The double walled means it has a...