build

I have following issue, recently bought Fe650 2004, but seems to have 2001 fe400 engine: code on cases is 4011172 Is it possible to build 2005+ fe650 engine basing partially on its parts? What big parts will be needed for sure? Whole inginition setup, 80mm crank, piston, what else? I would...

Not that there is really a lot to build these, but here is what I came up with after converting. Still need's a larger front disc, chain guard, and sliders installed. Happy with just about everything else! Pics Attached!

Hey guys! I've been searching for a replacement for my 08 KTM 690 SMC for a long time. I have ridden and owned a ton of SM bikes and nothing really compared to the massive torque of the 690. This spring I rode a buddies FE570 and was hooked. After a bunch of searching I picked up a MINT 11...

Just wanted to start a quick thread on the build of my bike, and post progress pics. So I started off with a 2000 fe501. Found the bike on an online ad...Bike had been sitting for over a year, in a garage. Went to look at it and I almost didn't leave with it. Just seemed like it needed a lot...

Cr250r all new

Hello, After finding virtually no info or pictures (even from Malcolm Smith Motorsports) of what I was told is a Malcolm Smith Edition 501 and deciding against building a Joel Smets replica out of it, I decided to just build the bike the way I would like it. The engines top end is...

Hi Guys, Im Gavin. Im relitivly new to the Husaberg breed. Infact the bike i have now is my first and ive fallen in love. My story began when i bought a bike without hearing it run or even seeing it. yeahhh i might have payed a bit too much for it however i fell in love with it. When i...

Hey guys, I recently aquired a 2007 FE650 with 49 hours on the clock. I thought I'd start a build thread to document my progress and hopefully get some advise along the way. The teardown: As it sits right now:

Hi everyone. I just finished having my motor rebuilt by Craig Hanson of Hanson Racing Technology. Helping him in his shop was awesome if a bit difficult. Anyway, I get more and more afraid that my berg will blow up and there will be no parts out there. Still, I am seriously lacking in motor...

FWIW Matts' thread doesn't show up at the top of the homepage when he updates it because its in the marketplace (vendors) section. I subscribed to it so I don't miss anything ;) http://husaberg.org/marketplace/11326-billet-cylinder-head-36.html

Hey folks want to get spare wheels for my '08 550 Questions: From what I have searched and read here, KTM sets from '04 on will fit Correct? or same on the parts if I wanted to go build my own KTM - hubs, spokes, rim sets etc? Thanx !! HR

now I wont bore you to death! and how much is being spent???[attachment=2]1374671623791.jpg[/attachment forks are leaking fuking great!!!!!!!!!!!!!!!!! removed the spring from the new wp rear shock fuking thing snapped in half and that was using a c spanner to!!

Well, I think some might find this somewhat interesting to read, and it's good to collect all the info and pics in one thread so here goes nothing. Back in -11 I wanted something different as I was thinking that bikes (sportbikes) are too boring, and I was desperate to choose whether to try a...

Manual says 90 hrs for new piston, camshaft bearing, conrod bearing, crankshaft main bearing. Just wondering what you guys have been replacing and after how many hours. Is it really essential to do this at 90hrs. (guessing it is related to your style and type of riding). Did you guys wait...

some of the ideas in here viewtopic.php?f=8&t=13017 need to be tested the pics still truncate, you can open the links below to see more frame design looks easy in photoshop adjustable mythbusters "Adams rig" style to check geometry another jig to hold the head still and locate shock...

So the build has begun. I thought I would start a post on my exploits whilst building a Husaberg 650 engine Supermono. Any advice / hints / tips from anyone would be much appreciated. First off here’s the background. I raced in the nation endurance series for a couple of years with...

Who's that big guy thats just won on a production dirtbike after leaving a factory ride for a second time to prove he's all that!! why i know he's no scientist but he cant half ride a dirtbike and just maybe he's got KUDOS!!!!!!!!

whats the best, 450 501 etc what the best mods i see that lineaweaver is on here and that you build some good engine any tips from all of you welcome.

Hi all, i have a 1999 FC600 that has an electrical gremlin somewhere. It has no spark, and i read on here that 99% of the problems are the stator and flywheel. My resistances checked out fine but i saw that the coating on my flywheel was missing and cracked in places, figured that was my...