breaking

Hi Guys, Need some advice on possible fix. Rode my 99 FE 600 today, Has new plug, clean left air filter, top filter basically blocked off waiting on replacement, New 98 oct fuel. Kick starts easy without the choke. Idles nicely, runs well when you don't rev it much and use the torque to push...

I had a Swede write to me two years ago about the balancer bearing. He'd broken one up and got it out. He sent me these photos (see below). have any of you done this? Do you know the Swede? I need to get the dimension of the circlip groove in the bearing. that is all I need? Anyone...

Hi all. Wasn't able to find anything on replacing the auto decomp procedure so I have a question about doing it with out breaking the timing chain in my 2003 400. I have an IWIS timing chain that's riveted, the chances of finding a split link around here are Nil and it seems in excellent...

Hi guys I'm breaking my bike, engine in bits had a gearbox problem and can't figure out how to fix it. Was hoping on a bit of advise on what price I should be asking for Frame Forks Beringer front caliper Triple clamp Wheels Any help would be great thanks

Hi Everyone, I have a 2004 FS650e supermoto that I may considering breaking for parts if there is enough interest. Like me know if you have any interest in anything.

anyone else had this trouble? I have had three owners over the years with broken liners, they break under the neck on the left hand side. I've just opened one up and found that the bottom groove has been rubbing hard and instead of breaking, it wore a groove in the wall in the area of...

I did some maintenance before taking my bike up north for some riding. I just changed the oil/filter and did a valve check not too long ago. I also had the bike checked at a local Husqvarna dealer because on a previous ride I heard a very concerning noise "Which ended the trip". I thought...

i bought my 2005 fs650 a couple of weeks ago. after 60 or so miles it stopped.! intake cam follower roller collapsed and one of the intake tappet adjusters sheered off. new cam, new roller, new adjuster and set all the valve clearances. managed to get 50 ish miles before the other intake tappet...

I am breaking a 2003 550 engine most parts available, email me

hello, my fs650 2008 keeps braking the back wheel's strings every time i have a race or a practice at the track. 1 or 2 at the time. the hub is without rubbers. the man that put together the hub and the 5'' rim , well i doubt a bit for his skills, could he made something wrong that can cause...

OK, all you guys out there with the 09 FE570's, has your fuel consumption gotten any better with the bikes now getting some miles clocked up on them, or are they still giving poor returns ??

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=025 cheers, John

I am breaking a complete 2003 FE400, i have the whole bike. PM me for more details, what parts you want and i'll email you a price etc. cheers, John

Christmas is early this year :) Monday I will collect my new FE450. The first in the Netherlands. So I just signed up to this forum. Nothing but good so far. One question: any suggestions in breaking in this bike?

I HAVE FINALLY GOT EVERYTHING SORTED ON MY BIKE AND I TOOK IT OUT YESTERDAY AND I NOW HAVE A NEW KNOCKING NOISE . STARTED STRIPPING IT AND I JUST CANT BE BOTHERD NOW SO IM GOING TO SELL IT IN BITS. IF ANYBODY WANTS BITS JUST PM ME. MIKEY THUNDERSLEY ESSEX UK

The big tank is bigger than expected I just filled the tank & it took 4 gallons!!!!!!!!!! Pictures in a couple sec's!!

I will be taking delivery of my 07 Fe650e sometime this week. This will be my first Husaberg and first 4T. Regarding the break in procedure, should I follow the user manual instructions, or is there is "better" way to doing this. Thanks in advance. Great site btw.

Is it me? Or does everyone have trouble tensioning the rim locks on these rim? I broke 2 today? I was so careful with the second one and still broke it? I use MSC rubber ones with a metal inner(that you cant see). I have even cut a section out of an old tyre to see what the problem is? I...