billet

Hi fellas! I'll be designing some billet cases for my supermono engine this winter. It will be taylormade to my specifications (DOHC-head, big bore, taller conrod, larger mains and a cb in front). In this process, I will also have the possibility to make cases that fit an OEM setup with kick...

Cheers guys! I have been getting requests on CNC machined valve covers for the Husaberg models 2001-2008. Now I have designed covers with an o-ring seal, which will eliminate the need of a gasket. These billet covers are also tougher and will not bend as the OEM´s do. A set will cost 75€. If...

To whom it may concern : I have produced a couple of anodized billet covers and oil filler plugs. Available in blue or black. https://www.motoren-israel.com/Husaberg/Own-Products/Valve-inspection-covers-anodized::202084.html...

I’m looking for another billet oil filler cap for my 06’ 650. Which one will fit? I once knew of a Ktm cap that would work but can’t remember. Anyone know? Thanks pollo

I got this important piece of the puzzle today for a future supermoto conversion of my 07 FE550. 17mm Offset Triple Clamps pollo

I'm looking for a 70 deg Billet Fuel Pump Holder/Adapter. Anyone out there know where I can buy one? Thanks, Ron

Hi Im just trying to fit my underbar scotts damper to my billet triple clamps and i cant get it to fit. Just wondering if their are any adapters or and idea on what i am doing wrong so i can get it to fit. Cheers Conrad

Interferes with my brake lever. Local dealers response is "uuhhh it shouldnt?" Uggggg. Any suggestions

Would be great if someone would make a billet ignition cover for the late husaberg engine The stock one leaks a little, at the top They are thin and could be damaged in a rocky section tip over Just a though for the after market guys

Hey guys cleaning out the the garage and looking to sell some unused parts. This is a brand new Husaberg Billet 1/4 Turn Fuel Cap. Work on 09-11 Husaberg FE390, 450 & 570 bikes. What you see is what you get! Price is $40 shipped. Pay Pal preferred. Thanks!

Took a tiny fall today on my 09 FE570 and managed to push off the Motocomposites clutch cover protector (2nd one i have lost and their stock fixings are garbage by the way) and put a nice crack in the cover itself. It weeped some oil on the ride home and is gonna need replaced. Are SFB still in...

Hello people! The cylinder head has got a couple of seasons track record with very good results (winner of the Nordic Supermono Cup 2009) with high power and outstanding reliability. However, if I would have done it today, there are still some things I would change for even better performance...

I have a 05 fe 650 and want to put a billet aluminum gas cap on it. Anyone got one? Do they swap over with the KTM's?

How do they perform, how much did they cost, and would you make the previous (longer) intake rockers as well?

Magnusson, http://www.topplocksverkstan.se/referenser.html?

I made a billet ignition cover with two 1/2-14 NPT threaded holes to do the ignition modification. I also add an O-ring to seal better and I add an extra 1/4 of an inch to make room for my fly wheel weight. I was wondering if there is an intertest for people wanting one of these covers for...

Which billet mount do you advise for the Endurance computer? I almost lost mine yesterday if it was not for the kid's keen eyes... Thanks a lot for your advice!