beam

The bulb has blow for the main bean dashboard illiumination on my 2011 FE450 - my eyes aren't as good as they used to be and I can just about make out 2.3 on the side of the tiny LED type bulb. Any ideas what type I need to order off Ebay?

Hi all, Electrical problems with my 2012 FE390. I've recently done some electrical work and now every time I switch on the high beams the fuse blows, low beam works just fine. I've only made some very minor tweaks to pickup power for a Trail Tech Vapor and Montana GPS cradle, which I have...

Hello, I recently purchased a 2009 Husaberg FE450. I have a question to you pro's out there. :) When I turn on the headlights with the switch, the low beam does not turn on unless I flip the switch to the high beam and then back on the low beam setting. Any idea why that is?

I had a lot of electrical troubles so I went through the whole wiring system finding 2 bare wires touching the frame and a couple smashed wires. I fixed all of these but now when I turn the bike on, it is fine with high beams on but when I switch to low beams, I blow either fuse 3 or 5 or both...

Hi all, Firstly i have a 2002 FE 400. Today i got round to greasing up the head stock bearings and in the process the headlight cowl had to come off and the wiring got a bit messy :oops: :oops: After getting it all back togeather the tail light and high beam were not working :( Could this...

Need some help finishing up dual sport lights. I have a new euro wiring harness, factory hi/lo/off switch and a dual filament bulb. Anything easy to check as to why its goes off / lo / off instead of Hi ? Spring's here, need to take off the studs and get road legal. Thanks for any...