barrel

I have bought a 2004 fe450 and am looking for a wiring diagram , I am wanting to get rid of the ign barrel and just need to know what the 4 wires do, I have 2 yellows, a brown and black with yellow trace, one of the yellows goes live when staring and is live while running, I take it the brown is...

Looking to see if someone can have a look at the back of their key barrel and tell me what numbers relate to what color wires. There are 1,2,3,4 on the back off ignition barrel stamped into the plastic and the wires that conect to it are 1x brown ,1x yellow with black stripe 2 x soild yellows...

Hi guys, has anyone ever experienced this? When I take the key out of the ignition, it pulls the barrel "innards" out with it?? Most puzzling?? (perhaps an additional security feature...) Cheers Crispin

I have heard a couple of rumors around that the top engine mount on the 09 Burgs is pulling the barrel away from the bottom end of the motor. Has anyone else heard these rumors.

fellas, can anyone help my out i have an 04 fe 550, and want to know is there a genuine husaberg ignition barrel available for these?? obviously i have nothing but the red button now but that wont stop some low life scum riding it away at the local shops, i could fit an after market job no...

Hi all, am Helgard from South Africa. Bought 01 Fe 650 yesterday. Nice. Starts crap. Am building a jig where I can jump/ run start it off my GSXR1000. Rearwheel to rearwheel on a kind of paddockstand setup. Will tie both down well. Berg side will be on a hinge so it presses down on the suz...

Can some one tell me how to remove and replace the steering lock barrel? I have a new lock assembly keyed to match the keyed ignition... Cheers Mark

How Does The Starter And Ignition Switches Work? Cant Seem To Find Where The Power To The Starter Comes From. My Ignition Switch Only Works The Lighting,Still Can Start Up Off The Kicker With The Key Out And Barrel Unplugged? Cant Seem To Find The Point On The Wiring Diagram,Didnt Have Long To...

how many of you have moved the ignition lock barrel to a new location? where did you fit it and did it all go well? advice please. regards Taffy

when rebuilding my engine i noted that the barrel/spigot/lining or whatever; had ripples at the top and bottom but badly at the top? i trust this a nikasil lining these barrels have? only i had about 10 barrels on the ducati F2 i raced and there was NEVER a mark or a notch! it was air...