ball

I have a 2000 fe400 and I think it needs the pushrod ball bearing put in based on what I've read here because the slave doesn't reach the push rod. I have one do I just put it in the pushrod hole and then stuf the pushrod behind it and ram it in or what? I'm afraid if do that it's gonna drop...

Ok so I have the short exhaust vent tube on the stock fuel cap, 2011 FE570S, and I took the check valve ball out of the cap, as recommended here and on other forums,,, When I put it back together I tightened the three screws back to hand tight and I couldnt get the fuel cap to close any longer...

Hi guys, i'm here again to share with you more enduro trips videos. I hope you'll enjoy them!! :mrgreen: [youtube:1zgb4o52]http://www.youtube.com/watch?v=8abQ_CYjQ2E&list=UU8yqsRIMMyVPGhx2UCwwvSg&index=1&feature=plcp[/youtube:1zgb4o52]...

I'm cannot for the life of me adjust my clutch so that I can engage and disengage it within the throw of the lever. When I took the pressure plate off, I noticed that there was no ball between the rod and the plate. My fj1200 has it, and I'm wondering if there's supposed to be one on the berg...

i, maybe you know i have a 628 engine to be regenerate. i've read something about the main ballbearing which often fails.. which bb should i buy to replace them?

Dear members, I really am sorry to bother you guys about a "beginners" question, but I have a "seed of doubt" in my soul. I am overhauling my trusty Mr.Maximus (Hus.550´01 model) Among other things I am replacing the connecting rod (It still is stock, as is the piston / rings ! )...