balancer

I had a Swede write to me two years ago about the balancer bearing. He'd broken one up and got it out. He sent me these photos (see below). have any of you done this? Do you know the Swede? I need to get the dimension of the circlip groove in the bearing. that is all I need? Anyone...

G’day Guys. Further to the vibes I’m experiencing with this 610 I’m wondering whether the balancer has been left out by the previous owner. Nope. What I’m seeing is two balancers. One above left of the clutch and another in the opposite side in behind the stator cover. Can someone give me...

Hi When i assembled the two housing halves, i could not turn the balancers shaft without using a spanner. I remember there was a spacer when i disassembled the balancer from the crank, and i did put it between the crank and balancer. Is that right? I assume i should manage to turn around...

Hey husabergers, I am replacing my counter balancer bearings, and as i see my bike only has 1 bearing and not the double bearing. I have bought 2 custom made bearings from orangeberg, but i cannot remove my current bearing. I have warmed up my counterbalancer to around 170 degrees celcius...

hi. I want to change the crankshaft bearings at my fs 650 but they are too expensive. 130 euro two bearings by ktm. I am looking for SKF or KOYO but i dont know dimensions to call a dealer for price. do anyone knows dimension for crankshaft bearings or code? i want to change and the...

I started this topic in the 650 crank balance thread but wanted to post it in its own topic to make it easier to find. The 650 crank thread has a ton of good step by step posts by bushmechanic. I wouldn't have done mine without it. See page 10 for the pictures of my crank...

How to fit single bearing balancer onto the crankshaft? Heat? If yes - to which temp.? 100'C enough? I don't want to overheat nylon retainer.

I need a new pair of balancer bearings. OEM or good quality machine bearings. I consider buying the whole balancer at a good price;) I am not interested bearings from Taffy.

Good evening to all their friends. I would like your help. Does anyone know if fe 450 2004 has trouble balancer shaft and often wants Bedlinnen; I think the manual says in 90 hours to check out. Every thought is accepted. Generally would like to know if you've heard various problems have rather...

Hi all. Please give me an answer where can I buy balancer bering? I don't want to buy all balancer with bering included in the service shop - it is to expensive

does any one know where to find balancer bearings ? also looking for some 105 mm head gaskets , does any one have some idea's ?

Hi all. I am helping a m8 rebuild a basket case (04 650)and was looking for verification from someone in the know about timing marks for CRB gears. The DOC gives an explanation, but the mark on the balancer weight (factory dot punch) on the outside edge seems to line up...

i am looking at removing the balancer shaft from crank cases from a 97 501fe is this worth doing to save a little weight and gain a little extra power or shuld i just leve it in.

Howdy peeps, from ya bro down under. just starting the big rebuild on my 04 650 an i've got stuck already Tell me. Is there a simple way to undo the balancer shaft nut? (other than the obviouse spanner socket etc). I have got the clutch and crank nuts undone but cant see an easy way of cracking...

I spilt the cases on my 2001 fc550 to clean up and check out everything after a camshaft bearing let go.Fortunetly, nothing else was affected. Crank bearings and con rod feel perfect after about 150 hrs.Decided to replace balancer bearing while it's apart. My question is the manual says when...

Hello all, Just a tip when updating this part. When I splitted my engine I found the single bearing counter balancer and decided, according the Owner's Doc, to replace it with update part # 210 243-01. This part seems to be discontinued and I received part # 800.30.057.100, balancer model...

for those that have done engine rebuilds you will have dreaded that moment....the moment when you peer (sp?) down the side of the rod, the crank, the barrel, the piston and try to time the balancer with the gear on the intermediate shaft. on the pre '03s this was easier as the crank had...

just trying to get the SP on the faliures people have had with these in the past? i have noted a very tiny hole in the crank cheek of the '04 engines. the hole is about 0.2mm and just off the left crank journal. its aimed directly at the balancer bearings ball race. so with this in...

hey all, I have some questions regarding the counter balancer (02 470) do they rotate opposite direction of the crank and 90 degrees apart when the piston is at TDC and BDC? can it be long lived with the double bearing set-up or sould one consider removing it for street use?

Hi all, i´m owner of a '97 501e. Currenlty i'm rebuilding the engine. With help of this forum i got all non-oem part numbers for the bearings and the sealings...except one!!! The rollerbearing of the counterbalancer sitting in the right crankcase. I destroyed the old one so i cant read...