autodecomp

Hi guys ! I´ve had my Enduro-Berg for about a year and ran ~40 hurs on this little princess. Prior to me it had been overhauled with bearings and so. Previus owner said that thah was done just before 200 hours 200 was the meters reading for the milage and 74 was for the hours when I got...

Hello, I am looking for the complete auto-decomp mechanism for the head of my 91 501. I also need the cable from kick starter to head. Anyone have one or know what other models mechanism would fit? Thanks

Hello. ive been riding almost 2weeks with my Husaberg and it has worked almost perfectly. :o But im dissapointed to electric starter problems. I installed the repair kit spring and washers but its still slipping, washers didnt help to get freewheel to hold enought torgue. When engine is warm...

Hi, do i need the decomp stop nut even if i have a new decomp that doesn't use that one i was thinking of the balance

Hi guys, Just removed the head of my 2000 FC600 to inspect the valve seals and piston / oil rings, as the bike has been putting out alot of oil smoke recently. Found out that my bike has no cam-operated auto -decomp device. The only decomp device fitted is the cable from the kickstart...

Gent's As the subject suggests. My cam operated autodecomp device flopps loosely when turned upside down. I don't recall it doing that when i first put it in. Is it a fault with the spring or do they all do that ? Will a new spring help or can i wind up the existing one, which currently...

Having thought i had this thing wrapped up - i'm asking for ideas before i remove my cylinder head to take a look. It was time to adjust the valves as i noticed the noise and the fact that the auto-decomp was struggling to work and therefore allow the engine to turn. Having done my valves, the...

I just bought a used 2005 FE450E; only 39 hours. It had the, now standard, starting issues. I am not mechanically gifted. (I learned everything from working on my 03 FE400 and using this site. Taffy, thanks for the Doc.) I think what I just experienced may be of interest to new Husaberg...

Sorry for that repetition of an old topic. looking in the partsmanual 03,04,06 I see, that the camshaft was new in 2003 for 450/510/550. I think I have in my 2001 501 the model 2003 camshaft (and the steel camshaft gear) the decomp shaft was changed in 2003 and is the same until yet...

98 FE501E - I have my engine torn down for an unrelated issue, and noticed the auto-decomp spring was broken and missing the ends, leaving just a coil around auto-decomp shaft. There's no manual decompressor on my bike. I have been in touch with a dealer to get a new spring, but would I see an...

I have a question for the masses regarding the auto decompression device located on the kick start shaft and decompression lever that it actuates. I posted in another thread (Broken kick start shaft) but didn't get any responses to my questions regarding the decomp system. Please go to the...