adjuster

Hi, I have a 2001 fe650. Looking for new chain/axle adjuster blocks as my old ones are modified ktm ones and they look tatty and orange. Seeing as they are no longer available, what do people use instead? I'm after anodised blue or black ones. Will any ktm, husqvana parts fit? I know I...

Hey, first thread, thanks for having me here! Just wondering if anyone has tried to fit one of the fancy xtrig preload adjusters to any of the 09-11 bergs? I figure it would be a pretty decent upgrade, but can’t find any info on if someone has tried this before. They don’t directly list one for...

Hi all so I wound the fork preload adjuster in just until it stopped. Now it's stuck and when I try to turn it back it also undoes the cap. Any suggestions ? Can I just unscrew the cap whilst still on the bike? Cheers

Hi all! Recently started to adjust my suspension on my 2003 FC550. Looking in the manual it says default rebound on rear suspension should be about 25 clicks. Problem is i only have 10 Clicks ?? And i can't feel any difference 1 click versus 10 clicks. It's still ok to drive but it feels like...

Have a 2011 570 and was out for a ride , was quite wet and muddy at times and as rough as bags also ,I felt like i was getting a flat through out the day, then heard a real bad crunching death noise and chain rattle , thought my gearbox had lost all its gears, pulled over, axle with nut and...

My 04 Chain adjuster blocks are in need of attention and I spotted these on feepay http://cgi.ebay.com/ebaymotors/Bolt-Cha ... 2c5b6a46c7 It says 05 onwards in the ad but hoping they will fit my 04. Anyone have any experience?

Hi All, As development from our enduro race team we have now available a Husaberg 4 stroke throttle cable in BLUE with an inline adjuster to allow free play adjustment of throttle without removing the tank! Not only is this product good looking it is 35% cheaper than OEM! We have them available...

hello, 2008 fs 650 e right preload fork adjuster , keeps unscrewing its self after a ride at the track. 1 complete turn per hour of driving. the left one is ok, both they are set 7 turns from fully unscrewed. can anyone help?

i have a frozen rebound adjuster on my shock. i have inverted the shock, and pulled the rubber plug, to put some penatrating oil on the frozen part. is there another idea to correct this? thanx. 8O

just wondered how many of you have found the eccentric adjuster to not have enough adjustment in it? right after my first ride mine was on maximum and if it had been 3mm bigger it still wouldn't have been enough! i now have LHRB but i look at many huseys and they are all on the maximum...

So... I'm in the middle of greasing and cleaning stuff and I notice that - #1 - Somewhere along the line my shock spring got put on upside down (Not by me)... #2 - My rebound clicker is frozen solid. Remedied #1 by turning the spring over, as for #2, I'm at a loss. Without tearing...

Hi All, Any body got any good hints for loosening a seized chain adjuster apart from sheearing it off and drilling it out. Sparks.

Has anyone got a cleaver way of accessing the rebound adjuster on the shock? My last 3 rides have been in pouring rain, slop and mud. I'm getting to where I am fairly comfortable at adjusting the fork compression by feel, rather than lying on my back visually observing the screw roatating, but...