adjust

Guys sorry if this question has been asked before But how do you adjust sag on a fe 390 Can’t get a tool in to adjust the spring. Do I need to take the rear suspension out to adjust the sag? Or is there another way? Cheers Dan

So I have a 2006 KTM 250sxf w/ fcr carb. The bike idles well, starts easy, has great throttle response, no bog. The only problem is when I'm putting around with no real load/no acceleration say 1-2 gear with the throttle rolled just above idle it sounds a bit rough. How should i go about...

Hi guys, not very mechanical here, but just finished my first valve adjust on my 08 fe450 today. had a shop do them last time, and while i watched, being alone is another story :) I went with 1/6 method The adjust itself is easy enough, but the issue is finding TDC. I tried to follow the...

hey, I had a few issues when i started the journey to adjusting my valves, i recently found these videos, hopefully someone else can find them and find them useful before they start making mistakes like i did. this way is more visual http://www.youtube.com/watch?v=hWS9RuEQzc8 this way uses a...

Took my fs570 in valvle adjust at 40 hrs, they left the breather hose off and it ran really poorly got hot and died a couple of times, spit some oil out. Went to pick it up and it did not start battery dead. They replaced the battery sorted the lines and got it running. I go pick it up and it's...

Hey berg owners! I just installed my new exp 2.0 rekluse. I love it! It seems like it will be a huge advantage in the tight stuff. A couple of questions maybe for anybody that may have a rekluse already. Do you notice a different free-play gain hot vs cold? I get more hot. As the clutch...

2002 FE400. My first Husaberg, finally, and wanting to make sure things are in check. I'm aware of the recommended upgrades to both timing chain and slipper but have been unable, through searching this site as well as owners and workshop manuals, to find the proper procedure for adjusting the...

I search on forum but cant find the answer , i don't know how adjusting ignition timing in my berg ,just read owners doc but i have different SEM stator :/ Sebastian

Hallo there! I´m fooling around with the adjustment of my handlebar and the clutch and breaklevers... I´m trying to get the levers in a straight line from my arms, when I´m driving standing... The Clutch is no problem.... but the breaklever is.... if you want to bring it down...

Help a newbie out, please? My 'Berg is hard to start. Especially when cold. I'm the second owner that I know of, and I don't know if the valves have ever been gone thru or not. So I figure this is as good a time as any to adjust the valve clearance(s) while I already had the bike apart. But...

Is this adjustment only velocity sensitive? Is it functional everywhere in the stroke or just during the final travel? Is there a limit to it's adjustment, i.e. stops moving at 4 turns out?

Hello! I am new on this forum, and a newbie with Husaberg. I have bought a 2005 Husaberg FS650E (brandnew, 0 miles/km) I have been riding for more then 500 km now, so i want to check he valve clearance. How do i it? How can i find the TDC?(top dead center) There is no "peekhole" in the...

Hello all I just did a search and wanted a better answer, I have a 07 650 and now have 4 hours on the bike, the manuel says check em at 3 hours, when have you guys been checking yours and what are you finding??? I sure love this bike, it is just awsome in every way!!!!!!!!!!! :twisted...

I know this may be a old hat for some of you but I have run in a problem.I have tried adjusting the the float level about all day and the results have either been flood or famine.I also checked in the service manual with no results.My question is how do you adjust to get the correct float height...