This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

accelerator

  1. J

    2004 FE 650E Accelerator pump rod missing

    I removed the carb to fix a leaking float needle valve and noticed the rod for the accelerator pump was missing. I bought the bike used and this is the first time to have the carb open. The bike runs great (as far as I was concerned :( ) so I never suspected a problem. It doesn't seem to...
  2. K

    accelerator pump adjustment

    Is there anything in the forum that explains accelerator pump adjustment on the FCR Keihin? Thanks in advance Fritz
  3. W

    No accelerator pump on Dellorto?

    I have my bike for a few months and today i was fiddling around the carb and noticed that my Dellorto PHM doesn't have accelerator pump. I talked to the local bike mechanic that rode Husaberg some time ago and he had a couple of similar Dellortos laying in garage and they all have accelerator...
  4. M

    R&D Power Pump 2 Accelerator Pump Cover

    Hi, have any members tried or are using the R&D Power Pump 2 Accelerator Pump Cover if so does it improve the bottom end response and or does it aid reducing the occasional hot stall i experience, i'm riding a 2004 fe 550 trail riding thanx..........colin
  5. C

    FCR Accelerator Pump Squirt Off Center

    While in the process of jetting the FCR carb on my '08 KTM 250 XCF-W, I noticed that the AP squirt is decidedly off center, i.e. squirts noticeably to the right. I would guess that the squirt would hit the right side of the intake port within inches of entrance. Can the AP squirt direction be...
  6. M

    Diaphragm accelerator pump

    Hi, Is it possible to use a diaphragm accelerator pump on a dirt bike? I have only seen piston-type accelerator pumps. Since it seems to be good for the functionality for a big four-stroke, why isn't it used with the Dell"otro carb?
  7. N

    Keihin FCR Accelerator Pump operation

    Hi there! I have a question, i am rebuilding the Bearings of the acceleratorpump. and i recognized that there are two positions for the Link lever of the pump. Please look at this diagram, the linklever i mean has the Number68: http://www.sudco.com/Diagrams323728/expfcr.gif If u look at...