700

Hi, ive got a JBS 700 in my workshop i would like the obtain the 6 pin tool to remove the retainer plates on the main bearings, can the cases be split with those retainers in place or do they need to be removed. Thanks in advance ORANGEBERG

Hi, got a 700 engine on my bench that was shipped out to OZ from UK, was started and blew smoke and oil everywhere within 30 secs then shut down, first thing i noticed was wrong head gasket 103.7 mm bore and 100mm head gasket fitted ??? not good!!. Will be looking for a 103.7 head gasket and...

It looks like I will be getting 650 motor that needs overhaul. So I through while doing this much might as well go for 700 kit. Now I am thinking whats the advantage of 735 over 700? What is the difference? Anyone ever ridden them both?

Hey guys! I have been looking high and low for a '07 Fe 650. None to be seen in Ontario since I have joined this forum. Now I see 2001 chassis with 2003 engine. It is Fe 650. I have read that they have weaker ignition/problematic? How about the carburetor, is it the same as '07? And most...

Ok , there are a few guys who can chime in about this comparison. I had just been comparing the 650 to the 550 I just bought. But I thought it would be interesting to hear the differences between the 650 and the 700. I think its about 60cc difference. 628 to 690 or so. But interested in the...

Ok, here we go... The 'kit' no longer available:( 1: piston, JE? CP? But what spec? 2: liner? Westwood 105.5? 3: head gasket? 4: Studs? ARP? 5: Bushie's piston broke 6: I'm pissed and broke 7: Dr C is alien intelligence How hard can it be?:eek::eek: :p:happy::p

Yes, I know who used to sell them with his 700cc kit. And if it were possible to contact Ben I would presumably have one by now. But anyone who's tried to reach the guy lately knows the obsurdity of the task. :angry: Anyone know of a reputable custom head gasket maker? Or, maybe I can reuse...

I got a 700 Kit off Ben last year. The plan was to put it in when I wore out the stock 100mm ELKO piston. With 210 Hard hours on it and showing only 0.02mm wear on the piston and 0.01mm wear on the liner I decided I would grow old boring and very slow before I wore out the mighty berg 628...

Greeting good people! Someone here who has tested the JBS 700cc kit? Thanks

.. should I be doing anything special after this trip besides changing oil/filter and checking valve clearances? Bike now has 5000kms and about 120 hours. The half the ride report and pix are here, http://www.nsdsc.ca/Gallery.aspx?whichgallery=2006-09-22+and+23+Cape+Breton&back=/Gallery.aspx...