660

I've been working on this project for some time now and am finally at the point where I feel it's time to start a thread to document the build. My history with Husabergs dates back to...well...before there were Husabergs. I was a Husqvarna guy in the 80's. My first was an '83 CR 250. Then...

Started to pull the motor apart to check it over, what do you reckon to this!

Does anyone know what spec the JBS 660 motors were? I know where there is one for sale but the owner doesn't know much spec wise other than it started life as a 628cc 'pork chop' that Ballard's built, :unsure:

Is it possible to install a 660 bigbore kit on a 450? Husaberg Fe 450 2009 and install a 660 bigbore kit?

Hi Just to let everyone out there know that I successfully fitted a front end from a 2006 kTM Lc4 660 without any need for modification. The Bearings fitted perfectly and the stem is about 2mm longer than the old bergs so I fitted a shim to take up the slack. All seems to working so far with...

http://i165.photobucket.com/albums/u79/ ... C02063.jpg http://i165.photobucket.com/albums/u79/ ... C02062.jpg NOTE that the stats for the Aprilia are on the left while the husaberg is in the middle and the ktm is on the far right. this is from the november 2006 issue of BIKE magazine.