650fe

150 eur + shipping Located in Estonia

Husaberg 650fe supermoto 2002 65bhp and just 112kg Just serviced New chain and sprockets ZF & D.I.D. chain Custom exhaust system Venom rear can, new exhaust springs and clamps Samco hoses Talon hubs Uprated carb Magura brake master & clutch master cylinder ZF Alloy 46 tooth rear sproket...

Owned since Jan this year, had some fun, done some upgrades and improvements and fixed some bodges frome previous owners, just had oil and filter change, new chain and sprockets (to gear down), new kick-start, new samco coolant hoses, water pump seal gasket, new rear mudguard, local graphics...

So, my buddy can’t find the bill of sale from when he bought this bike (super disappointed about it). We’re just going to make a new on which is simple but we can’t find the VIN. It’s not on the typical forks or frame. There’s an info plate which doesn’t have it & a stamp on the frame as you can...

Hi, and thank you for letting me join the forum. Just bought a 2006 Husaberg 650 FE with SM wheels. It has a grinding-like noise when I use the gears to brake (reminds me of cam chain noise). Is this normal?

I am selling my 650fe. 2007. Not sure on mileage but hasn't been riden since 2010, was in storage until this spring. Nice condition. New rear tire,battery, air filter and fresh oil change. Call 605/380-2423

Still trying to figure this thing out I ve been finding black plastic in frame directly under air filter looks like it is coming from vent on top of cylinder im thinking its coming from guides or plastic bits around cam chain ? Has anyone seen this...

hi and wanting to sell my bike, the bike is on a 52 plate and a 03 engine, it is currently sorn off the road, comes with v5 all old MOT's. as you can see from the pics the bike is not in bad nik for a 9yo bike. very good starter on the kick hot or cold, it will come as a supermoto so the wheels...

I give up. I hav spent too many hours trying to make a workable mould for a carbon mx end cap to replace the enduro cap. I am now looking for a replacment mx end cap to either go straight in or another enduro cap that i can modify (i want to keep the original in case of noise issues come WOF...

Sorry for asking such a basic question, but where can I purchase a spark plug tool for my 2006 650? When I bought the bike the previous owner lost the tool kit. Thanks in advance!

I just replaced a cheap Chinese battery with a Yuasa battery and everything was fine as it started right up and I was able to ride the bike home for about 5 miles from the bike shop. Stopped by my friends house to show him the bike. Went to restart the bike and I heard the starter "click" once...

I am having trouble with my electric start it wont.It will turn over but its really slow.i have replaced battery and checked my valves which are fine.Starts ok with kick start but is tireing any ideas.

I remember a discussion a couple of months ago concerning a problem with the valves on the 650FE I can't remember if it was something with the guides or springs or valves themselves. I have searched everything I could think of and can't seem to find it. I want to take any precautions necessary...

Hi all, I am recently become the proud owner of a 2005 fe650 berg. Before I purchased, I had never riden or even seen one... I have had the bike for about a month now (and love it) BUT having dramas with the Estart. When the bike is cold, and when attempting to start via Estart it will...

Has any one played around with fuel injecting one of these bikes,would like some thoughts ,do you think its worth it,any input would be appreciated.Am thinking about it at the moment have throttle body,off a buell,just need to machine up injector seats ,no problem though a efi pump off a honda...

Looking at a 2002 650FE with approx 1875 miles on it. Are there any issues or concerns I should be worried about on this bike??? Thanks

Am thinking cam chain or something broke not sure yet though? Any ideas?

Hi guys since now having my bike for around 7000kms and not changing a thing on it i am wanting some input. I weigh about 100kg with all my gear on etc 1. After changing gearing from 16/45 to 15/45 the big girl now wears me out in the tight when i try to mix it up with the 450s. I liked...

I need some input on super motard wheels. I have a customer that is looking for something that I have had no experience with. First will the super motard wheels in the '07 Husaberg Accessory Catalog go on the FE650 (is there enough clearance)? Second, there is a second set of motard wheels...

I am in abit of a pickle i need some for my bike (2005 650FE) and i didnt order them from my berg man and i need them today. Can i go to the KTM dealer (are they same as 525 etc) and get them from him. If so what part number would i need to quote? Thanks guys...