500

I have a 2009 Husaberg FE570 which has a bore of 100mm and stroke of 72mm. I have found that a KTM 500EXC has a bore of 95mm (same as Husaberg FE 450) and stroke of 72mm (same as FE570) with the same compression ratio of 11.8:1. My question is: will the KTM cylinder fit on the Husaberg so I can...

anyone selling a rear wheel or rim 5,00 inch for berg 650 2006

hay group, hope ya can help me . i got a 1995 501 Colorado special edition, been googling it but have found nothing specific on this model. its kind of beat up and the wiring has seen better days,but it looks like it has a wire harness for a head light, and starter button. it will kick start...

Hi guys, I have an old '86 KTM 500 MXC thats in really poor condition but the engine is good. I'm having trouble chasing up parts to restore it but being a left hand kick start, I was told that I could possibly put it into a 2008 'berg frame. Any thoughts on this? Has anyone heard of it or...

lads, I haven't had any luck finding a reasonably priced ktm for sale. I did locate a low hours FE 501 and I'm considering, is anyone here familiar with them? Couple things I'm nervous about.. 1) bike had a new top end at 30 hours due to burning oil. The owner says this was also an issue with...

Chest mount POV with GOPRO HD onboard HONDA CR 500 AF @ GoKart circuit ! Trying to catch me on my HUSABERG FS 650e ( 60 rwhp ) :cheers: [youtube:3qf9u4xy]http://www.youtube.com/watch?v=ObEO_drG_bw[/youtube:3qf9u4xy]

Hi, Last sunday I've made a Trackday on a new kart circuit to me ( Bombarral in Portugal ). I've took my Husaberg FS 650e, but I had the opportunity to ride an Honda CR 500 AF of a friend of mine. Check out the Honda CR 500 video and the Husaberg videos...

For sale: FE 570 modified to FX 500, the ultimate MX and Cross Country weapon!!! See link... http://suchen.mobile.de/fahrzeuge/showD ... geNumber=1

I have tried two different sources for rear brake pads, is there a different caliper if it has the colorado 500 swing arm , tried two different sets from two different sources, ebc, parts unlimited any secret, thanks from alabama.

I was lurking on Race-Dezert.com The results were posted. Some day someone will beat the Honda team just to keep it interesting. PowerCell and I were in Baja to watch the race on our 950s. We watched the Trophy Trucks and Class 1 buggies go by out on the course. We headed back up to...

just watchin the 500 on uk tv. seen a husqvarna but no bergs yet. but to be honest no bikes other than the honda 1x of mike bell is getting much coverage. the buggy though are insane. like something from mad max.

http://www.thumpertalk.com/forum/showth ... ost3382320

Can anyone point me in the rite direction for buying new aftermarket plastics; fenders, shrouds, and side panels? I am new to riding husabergs. I have an xr650r and a cr 500, but I have always wanted a husaberg. Any help would be greatly appreciated. Geoff

pardon me I didn't receive my owners manual and I have not downloaded anything, but the husaberg check list that came with the bike says do not change the running in oil installed at the factory till 500-600 miles. What is up with that? That is the opposite of Husqvarna, that first oil...

Anyone heard or had experience with worn out clutch in 500 km. Just picked up a new 05 FE 550 E and did some light hilly enduro work, changed the oil 100 km, then again at 450 km after some 200 km of easy sand and 50 km later clutch plates gave out. Spec when new 2.0 mm, change when 1.9 mm and...

8O Copied this from KtmTalk: Happened about 80 miles north of LA. Read elsewhere mine shaft was actually 1400 feet deep, but he stopped at 500 feet. http://www.nbcsandiego.com/news/3918796/detail.html

Hi guys, Taffy's question about different oils reminded me that the last time I was out buying a jug of Delo 400 I found Delo 500! Anyone know if it is better, different??? Cheers B FE650E 2001