2001

2001 FE650 converted to SMR. Everything is for sale. I recently broke the timing chain and the chain came out through the head cover, and I don't know how extensive the damage is, but I would assume the valves are compromised, as it happened at speed. Below is a list of all the individual...

Hi. Im rebuilding my 2001 650 engine and therefor starting this thread in need for some expertise :D Reason for rebuild is because the mains and big end failed. The rest of the bearings are bad so I’m going to replace them all. I’ll replace the HC piston & 82 stroker crank with a 05-08mod 80...

i have done the convertion from manual decomp on my 2001 fe650 to 2004 autodecomp, , and it works fine, but do i adjust the valves different, it seems to suck air true the exhaust now, and spits true the carb

Hi guys, i'm almost finish a business with an FE 400 from 2001 THE NEGATIVE: The bike is not working, broken stator i'm not a mechanic, i need to spend money on it THE POSITIVE 1000€ the owner says the rest works fine carborator rebuilt with glicleurs kit from taffmeisters two...

Hello, I thought I’d share some tech I just figured out. I bought a set of odi V2 lock-on grips and figured there would be a good chance I could get the correct throttle cam in the kit. The kit did not come with the correct cam, but they do offer several others separately. My 2001 Fx650e has...

i have a 2001 fe650 whit 40mm delorto it floods all the time, i took it apart and cleand it, adjusted the float hight and it was fine, but it was wery rich running, so i adjusted the needle 1click down, now its flooding again, and i dont open it, just loosened it up, and twisted it aside...

Evening all Got a 2001 550 in to rebuild after a bearing failure, just in the process of getting a parts list together If anybody can help with the following it would be greatly appreciated Mainly relating to interchangeability between the 01-03 Bergs and the 04-08 KTM Bergs cylinder...

G'day fellow Husaberg enthusiasts, I have a 2001 FE501e that I'm trying to resurrect, the standard SEM ignition setup was cactus, so I'm installing a coil and stator unit from Regulator/Rectifier in the States, and I am a bit unsure as to how the CDI unit is mounted, if anyone has done this and...

Hello, I bought a 2001 fe400 with a 2001fx470e engine in frame off and old man a month back and have blown it up twice already. First the bearing for the counter balance broke, not too big of a deal fix that and rode it for 15hrs and it seems as though the rings on the piston have let go. Was...

Good evening and greetings fellow Husaberg enthusiasts, I have recently purchased a 2001 FE501e, and am trying to restore it to its former glory, however, I'm finding it difficult to locate parts, mainly plastics, can anyone tell me if 2005 model plastics will fit, as the moto shop I have been...

Hi All, Does anyone have 2001 bikes or parts for sale?

The first hello everyone and thanks in advance if anyone can help me. I bought a 501 2001 for a year and I am in love. but a month ago I stopped giving spark and looking with a friend (I don't have much idea of ​​mechanics) we saw that it was the broken stator. I bought one used here in Spain...

was running fine until the cam chain broke. replaced cam chain, sprocket, tensioner and blade. all reassembled, now no spark. I did the orange wire disconnect test, stator tested spot on (red to black=3043, green to black=165) disconnected all but red, black and green. any ideas?? am i missing...

I was giving my newly acquired 470 an inspection prior to regularly riding it. I found several small issues that needed some attention,nothing major until I pulled the flywheel off. The magnets are beginning to migrate out of the hub itself. They are stil in their original positions, but they...

Hello! Last year I picked up an 01 fx650e, it’s a great bike just hard to find the correct information! So I’ve bent the front rim and I’ve been trying to find rims from a US supplier. Warp9 offers complete wheels for an 04 Husaberg. I called to ask them if they could supply a rim and spokes for...

Looking for replacement

Preferably 18” but 19” is ok. Hub will work also . Ktm substitutions ok also.

Looking for rear wheel preferably 18 but 19 will do for a 2001 FC500. Even a hub would be nice. Or KTM substitutes.

I currently ride and race a 2014 TE300 and I am getting a 2001 FC550 from a friend who has owned it since new. I’m very excited about this! Gotta sell a 2005 xr650l to make room for it in the stable first. I have been enjoying all the info I have read on this forum about it. I’ll post pictures...

i just got a 2001 FE650, it has a broken timing chain and a bad tensioner i think. i need a source for the chain and tensioner. where can i find an ( 06B ?? ) chain of good quality. 70 links?? i may need a new lower sprocket as well. thanks for the help!!!!