1992

Hi I am well into my 92 ex works 501 Fe = says 502cc on the engine .. My question is does anyone have a paint code for the frame and was it painted or powder coated from new? The frame had been powder coated sometime ago in gloss black which is incorrect - it should be light grey in colour but...

Good morning folks, my name is Max from Switzerland. I am quiet new on the Husaberg forum and a virgin in relation to Husaberg motorcycles. Last month I got a FE 501 from 1992 without engine. I got informed, that the engines from the early years are not very stable and very hard to get on...

hi I bought myself a 350 fe 1992 and the engine, the gearbox is in a thousand pieces I wonder if there is any book or blast sketch that you can get

1992 Husaberg FE 350 Replica HIC world champion Graphics made by us respecting measures, design and materials, HIC front brake disk replica. Running and good condition bike. Please ask for other info or photos. Italian docs. In Milan. (Graphics and brake disk for sale also separately in...

Does anyone have wiring diagram?

Good evening all, Carrying on my rebuild of the FE350, I have the bike running now, albeit on choke only. (click to enlarge) I am not sure what the brass part I have circled is for. I know it is for a rubber pipe but I am not sure what the pipe connects to. Any help would be great. Also...

Hi all, following on from my previous thread about the snapped tappet. I have now got two new exhaust valves, new stem seals, water pump seals and other bits, the valves are lapped in and head is back on. All seems to be in order. Now I am trying to get the cams and crank timed up. I...

Hello, After finding virtually no info or pictures (even from Malcolm Smith Motorsports) of what I was told is a Malcolm Smith Edition 501 and deciding against building a Joel Smets replica out of it, I decided to just build the bike the way I would like it. The engines top end is...

Hello, I am wanting to have a couple sets of custom graphics made for my 501. Does anyone have the vector for at least the rad. shrouds. Thanks

1989 to 1996 Husaberg FE 501 First Production Model Owners Manual 1989 Husaberg FE 501 Owners Manual 1990 Husaberg FE 501 Owners Manual 1991 Husaberg FE 501 Owners Manual 1992 Husaberg FE 501 Owners Manual 1993 Husaberg FE 501 Owners Manual 1994 Husaberg FE 501 Owners Manual 1995 Husaberg FE...

Hi everyone, my name is Chris & I am addicted to Bikes............ My real problem is that i bought a 1992 FE350 that requires a conrod kit. the dimensions are overall length 167mm width small end 18.8mm width big end 18.8mm big end Id 37mm pin Od 30mm pin length 60.90mm small end Id 18mm...

Hello Husaberg owners. i just picked up a 1992 FE350. It is a very cool bike. Can anyone tell me the good and bad about the model . I also could use some parts: Airfilter, Chain rubber, new decals ??? Can anyone tell who was a dealer in the 90's that may still have parts for these. Thanks Phil

After getting into road racing in '06 I've but less than 10 hours on my 'berg, and it's time to let it go. The engine is redone with a 2mm over piston (had the cylinder nikasilled again) and an MX cam. The rubber on the bike is pretty dry rotted, and the shift-shaft seal is leaking (though I...

i was wondering if anyone had any in formation on replacing the clutch on early husabergs mine is starting to creep when the clutch is in and it is in gear and it is difficult to get into neutral while moving and impossible when stopped

i was wondering if any one knows if the early husaberg's use the same sem stator that every one complains about or if they used something else before ktm bought them and if they do use the same stator where would i go about finding a backup thanks

What will happen if I eliminate the lower fuel pump on the 1992 fuel tank and keep the other one on the higher left side?

motor number 1020459, frame yu7fe35000n0000250. I sold it to John Appleby the importer in Victoria Australia in bits. Does anyone know what happened to that bike?

Not sure if it was a good thing, but I just bought a 1992 600 Husaberg. I would like to put lights on it and make it street legal. I'd assume it might need a larger stator. Recommendations on electrical parts sources and lights? I looked at the fairing/double headlight conversion being...