02 or 03

So a bit of back story before I get into it I was having major problems with the bike fouling plugs within minutes, so I decide I'd take the plunge and change to the FCR ditching the problematic dellorto, had troubles with the switch but finally had it running and running well with the FCR...

hello, does anyone know whether a 2004 berg stator will fit an 02/03 model? thanks

Greetings all :) Have done a few Schrader conversions on KTMs and now have the need to do a Husaberg. I understand there is the worry of the valve being destroyed by the chain at full compression- but looking at the chain roller wear marks and the few little nicks on the shock ressy it...

Hi guys Still persevering and just got hold of a 2003 550 swingarm and 2003 650 FS shock. On the basis that a 98/99 swingarm fitted in a 2000+ frame no problem, I'm assuming that I can reverse that particular piece of reverse engineering and put the newer back end in. Q1 - should it fit...

Hi Guys, I would really appreciate some input on some failure and potential failure points on our 02/03 bikes. 1st/ Intake cam follower roller wear at low hours e.g. less than 8 hours on a brand new 02 501 and 03 650. 2 different dealers said " ooh, I've never seen this before"...