Wiring loom for fe450

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 14, 2011
Messages
7
Location
Australia
Hi all.

I have an fe450 12 mod and it's starting to have a few little electrical issues.
The bikes done over 440hrs with no problems up until now,they have been all bush work so it is bound to happen.

I pulled it apart and found a few decent rub spots on the wiring loom.
I could go chasing all the broken wires but it would be much easy to get a new main loom.
The biggest issue is the fuel pump won't fire every now and then,the original fuel pump was replaced about 5 rides ago so that's not the issue.

Just wondering if anybody can send me a link as to where I could get one from in the states please.

Thanks,
Steve ( australia ).
 
Hi there mine did the same thing there is 4 red and white wires that go into one that has a brass nipple holding them together and they corroded up and fell apart, there up near the rear shock inside the loom deep inside.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top