Spark plug

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 7, 2024
Messages
3
Location
Sweden
My sparkplug SD05EG was broken and i found a SD05F what i can read at ngk s plug cover list i think it would work.
But my fe 650 2004 doesent start after i put in new plug
 

Attachments

  • Screenshot_20240517-225150.png
    Screenshot_20240517-225150.png
    206.6 KB
  • Screenshot_20240517-225134.png
    Screenshot_20240517-225134.png
    90.8 KB
  • Screenshot_20240519-191212.png
    Screenshot_20240519-191212.png
    101.2 KB
You must be sure the sparkplug make click when you plug it . There are two types caps . One for removable and one for solid sparkplug head
 

Attachments

  • - - - - - - - - - - - - - - - - - - - - - - - _NGK-RACING RED CABLE & PLUG.JPG
    - - - - - - - - - - - - - - - - - - - - - - - _NGK-RACING RED CABLE & PLUG.JPG
    938.7 KB
  • - - - - - - - CR3 # 8089 1.jpg
    - - - - - - - CR3 # 8089 1.jpg
    195.3 KB
  • - - - - - - - CR3 # 8089 2.jpg
    - - - - - - - CR3 # 8089 2.jpg
    55.9 KB
  • - - - - - - - CR3 # 8089 TERMINAL YES 3.jpg
    - - - - - - - CR3 # 8089 TERMINAL YES 3.jpg
    16 KB
That i know. I checked the spark and i looked good. But the bike is dead. It ran the day before
 
Check it again with another cap and make sure the cable fitted well inside . If the cable have spark the cap is bad or did not make good connection .
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Back
Top