Silent Running

Robg187 · Apr 21, 2009

Hi guys, can anyone give me some Mods and tips to get my berg sounding more smooth, i know they noisey as it is but sound like its getting louder each time i go out. What would make a difference( cam chain- valves ?)
Thanks.

vwhusaberg · Apr 21, 2009

I just replaced my timing chain because it was so stretched that it was hitting the inside of the engine. With the left side cover off, I could see where it was hitting, starting to make a groove in the aluminum. This caused a noise above about 2000RPM or so.

Dump your oil often to make sure there's not too much metal coming out.

Robg187 · Apr 21, 2009

Thanks Ray. did the oil a week ago was allot of metal on the magnet, gonna do it again soon to see if there's any change.
what about the valves do they make a difference?

berger · Apr 21, 2009

If you have excessive topend noise and metal on the magnet, check your cam followers NOW!!
Consider yourself lucky that the motor is giving you fair warning of a failure.

sparks · Apr 22, 2009

Robg187 said:
Hi guys, can anyone give me some Mods and tips to get my berg sounding more smooth, i know they noisey as it is but sound like its getting louder each time i go out. What would make a difference( cam chain- valves ?)
Thanks.

Replace the cam with a LX2 and fit dual valve springs, makes a big difference to performance also makes the engine noise a lot quieter. Speak to Taffy.

Regards

Sparks.

Robg187 · Apr 22, 2009

RE: Re: Silent Running

Thanks cam chain should be on its way soon.( Taffy?) and the spring will be the next thing.

Silent Running

Help Support Husaberg:

Robg187

vwhusaberg

Robg187

berger

Moderator

sparks

Robg187

Similar threads

Register CTA

Recent Discussions

Recent Discussions