Only low end power? fe501

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 4, 2024
Messages
8
Location
Suomi
A couple days ago I got a 99 fe501 and it snapped a valve already. But when riding it there was no power in higher rpms and felt like midway through the range it lost all. Wondering if theyre supposed to be like this?
I found a dyno sheet from another 99 501 and it's very different from mine: 1717514950694.png
 
I know fe450s had a hi/low switch on the handlebars that changed ignition timing for lower/higher rpms but mine didn't have that. It also pops and bangs pretty good so maybe its timing/tuning? its running a bit on the rich side but not too much
 
if you snapped a valve already then the valve timing was out and the valve was clattering the piston.

Taffy
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Back
Top