oil leak from clutch disengaging lever

fj1200 · Jul 19, 2009

My engine has the cable operated clutch, and it seems to be leaking oil from the o-ring that is supposed to seal the clutch arm. I can't seem to figure out how to remove it to replace the o-ring without splitting the cases.

Anybody have any ideas?

DaleEO · Jul 19, 2009

Pull the clutch cover.
Pull the pressure plate.
Remove the push rod.
Disconnect cable from clutch arm.
Pull clutch arm strairght up out of case.
Fish out seal swith seal pick.
Install new seal.
Install push rod.
Install pressure plate.
adjust push rod play since you've got it apart. Instructions, or amount of free play should be in the manual.
Finish re-assembly and your good.

If you need help with adjusting your clutch push rod play let me know and I'll walk you through it.

fj1200 · Jul 20, 2009

Ahhh. So it's the rod that locks it in.

Thanks.

oil leak from clutch disengaging lever

Help Support Husaberg:

fj1200

DaleEO

Moderator

fj1200

Similar threads

Register CTA

Recent Discussions

Recent Discussions