Oil and Fuel in Air Filter Housing ???

NewbyNorthWest · Nov 21, 2016

Hello,

I am new to this so go easy!

My cousin bought a 2015 FE 450 on Saturday, it had done 50 miles from new, anyways drives it back (less than 300 miles now) all good.

Next day spotted it had been leaking, so he's started looking and took out the air filter and it looks like a mix of oil and fuel in the housing.

Any ideas???

It was also a bit sluggish to start the next day if that's related?

Rainerio · Nov 21, 2016

He may have over oil the filter? Or use wrong oil? Try reoiling it with name brand oil. Don't know about the gas though?

jon andersson · Nov 21, 2016

Or it came through the breather hose. Check the engine oil and see how it looks, both oil level and if it has any fuel in it.

miguelangelo · Feb 5, 2018

Hi,

I had the same problem

, why ! because i had too much oil , remember 1L (period).

When i get it hot and push it hard, (it only happen twice) it can "drink" the oil and start smoking

but after 3 minuts it stop smoking, all because too much oil.

And yes it can go to the breather hose and to the air filter, and can even go to the carburator

hope this help

Husaberg Fs 650

FE350 · Feb 5, 2018

2015 FE450? Husky? Not a Husa as they were done in 14

Fuel would be a strange one as the bike is fuel injected. The filter over oiling makes sense as it would created the loss of air flow and make it sluggish. The over oiling could be, but easy to tell as the nice sight window will tell you very quick. The capacity in the machine is 1.2 ltrs. and it will show a tad over half with 1.2 in it.

Oil is syn 10w50 and filter is K&N KN-652 or High Flo HF-652 KTM part number is 77338005100

Oil and Fuel in Air Filter Housing ???

Help Support Husaberg:

NewbyNorthWest

Attachments

Rainerio

jon andersson

miguelangelo

FE350

Similar threads

Register CTA

Recent Discussions

Recent Discussions