Help Support Husaberg:
- Joined
- Apr 21, 2014
- Messages
- 689
- Location
- Chilliwack, BC, Canada
Air, Fuel and spark and exhaust is what is required.
Check spark strength with a adjustable gap spark tester. If ok check for fuel if both present check compression.
check coil connections. Check for spark loss from coil, bad wire coil etc.
Then if nothing its time to start looking deeper, Checking values with a ohm meter.
Sorry no fast answer.
Check spark strength with a adjustable gap spark tester. If ok check for fuel if both present check compression.
check coil connections. Check for spark loss from coil, bad wire coil etc.
Then if nothing its time to start looking deeper, Checking values with a ohm meter.
Sorry no fast answer.
Check resistance in spark plug cap. Years ago I had a dead Suzuki and a young but very good mechanic suggested replacing the removable resistor with tinfoil and the bike fired right up. My Husaberg is not replaceable but you can check resistance with an ohmeter, the ohms is written right on the cap.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
