new owner and need help

darko1307 · May 7, 2006

Hello!

I just buy fs650e 2002. it comes whit bad stator and coil so I buy new stator and coil, now my problem is to connect that wires there.
I connect that red, green, black from coil to red, green, black of stator, Yellow from stator to double red(where is going other red)?
What to do whit other Yellow from stator and where is ground to connect black from coil and blue from stator?
I can not find orange, gray, blue/white to connect gray, white, orange from coil??

In front of coil mounting place is I spouse regulator/rectifier whit some free pins but what to connect where?

Pics would be big help :?

Thanks, this site is very helpful!!!

DaleEO · May 7, 2006

Re: new ownrand need help

Hi Darko,

Have you gone to the download section and downloaded the repair manual so you will have a wiring schematic??

As far as the grey wire from the coil, the newer replacement coils are not coming with the grey wire anymore, thus no low ignition curve.

You talked about the rectifier having some empty pins, I believe that is the grounding bus, which is where you will find the brown wires go if I'm not mistaken.

Taffy · May 7, 2006

Re: new ownrand need help

Stator wiring
Is as follows: yellow into a double red, second yellow into a red/white, light blue into a brown, black into black and green into green.

this is from 'the doc'.

regards

taffy

new owner and need help

Help Support Husaberg:

darko1307

DaleEO

Moderator

Taffy

Similar threads

Register CTA

Recent Discussions

Recent Discussions