Hi All, I just bought a JD Jetting map switch for my 2009 Canadian market FE 570. It has 3 position, the instructions say that position one is "Less aggressive power delivery than stock" position 2 is described as "Mildest power delivery" and position 3 is "Standard map used from the factory" . Can anyone confirm this? When I bought the switch I thought that 1 was softer 2 was stock and 3 was a more aggressive curve, which is what I wanted the switch for as it's my snowbike, where as much power as possible is what is required. Thanks,
Help Support Husaberg:
- Joined
- Nov 6, 2011
- Messages
- 1,091
- Location
- Nordic countries
On the 570 the difference between soft and aggresive is sublime. If I forget the aggresive setting on and go for a muddy gnarly track I will notice it after some time as I normally use soft there. So go aggresive on snow, there is a difference but you will probably not notice it in on a snow bike.
Turbo however.... That is what the guys here use for snow bikes!
Turbo however.... That is what the guys here use for snow bikes!
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
