my 02 front brake lacks so much bite and power (and it's been getting worse) that i finally decided to do something about it. the rotor appears very smooth and polished with no grooved texture and i wonder if it's just too hard. i don't recall folks complaining of bad rotors on ktms or husabergs of this vintage......
Help Support Husaberg:
And give the disc and new pads a scrub with some emery cloth or steel wool first. Make sure the pistions in the caliper are moving freely and no crap is under the dust seals, and sliding pins are properly lubed with a little high temp antiseize, and the caliber moves freely from side to side. Make sure there are no significant notches in the pad retaining pin, or just put a new one in too, lubed with a little high temp antiseize too.
I put this together previously, might help:
https://www.dsmra.asn.au/change_brake_fluid.php
Steve
I put this together previously, might help:
https://www.dsmra.asn.au/change_brake_fluid.php
Steve
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
