Korbowod fe 501
- Thread starter Robson
- Start date
Help Support Husaberg:
- Joined
- Feb 19, 2003
- Messages
- 3,227
- Location
- Escondido, Ca. USA
Taffy has two 501 rods listed. One for first generation motors and one for second.
Taffmeisters
Taffy ma na liście dwie wędki 501. Jeden dla silników pierwszej generacji, a drugi dla drugich.
Taffmeisters
Taffy ma na liście dwie wędki 501. Jeden dla silników pierwszej generacji, a drugi dla drugich.
- Joined
- Nov 20, 2001
- Messages
- 17,032
- Location
- Ely, England
- Joined
- Nov 24, 2023
- Messages
- 9
- Location
- Polska
Dzieki bardzo
- Joined
- Nov 24, 2023
- Messages
- 9
- Location
- Polska
A znasz może numery tych łożysk 2szt
Attachments
- Joined
- Feb 19, 2003
- Messages
- 3,227
- Location
- Escondido, Ca. USA
So the 01-03 Rockers are a direct bolt-in for 1st Gen motors?
- Joined
- Nov 20, 2001
- Messages
- 17,032
- Location
- Ely, England
let's just say that the 501/470/550/650 exhaust rockers fit straight in for the earlier 501 and 600 - 1997 plus.
the later 400 exhaust rocker fits in for the earlier 400 and 1997 that's all it can help.
the 400/501/470/550/650 inlet rockers fit straight in for the earlier 501 and 600 - 1997 plus.
nothing ideal can can only help the 1997-2000 400 inlet rocker.
but unless mixing engine parts this isn't important. the thing is, to find a rocker arm you can buy today for the needs of yesterday.
again only the 400 inlet flunks out, the rest is all do-able.
special rocker arm
despite working off the centreline of the valves in the 400, we reckon it'll still do a job but we haven't tested it.
shhhhhh!
Taffy
the later 400 exhaust rocker fits in for the earlier 400 and 1997 that's all it can help.
the 400/501/470/550/650 inlet rockers fit straight in for the earlier 501 and 600 - 1997 plus.
nothing ideal can can only help the 1997-2000 400 inlet rocker.
but unless mixing engine parts this isn't important. the thing is, to find a rocker arm you can buy today for the needs of yesterday.
again only the 400 inlet flunks out, the rest is all do-able.
special rocker arm
despite working off the centreline of the valves in the 400, we reckon it'll still do a job but we haven't tested it.
shhhhhh!
Taffy
- Joined
- Nov 24, 2023
- Messages
- 9
- Location
- Polska
Cześć, tafi, widziałem gdzieś te łożyska na waszej stronie. Nie wiem czy to były te osoby, teraz też nie mogę ich znaleźć.
- Joined
- Nov 20, 2001
- Messages
- 17,032
- Location
- Ely, England
- Joined
- Nov 24, 2023
- Messages
- 9
- Location
- Polska
Dzięki
- Joined
- Nov 24, 2023
- Messages
- 9
- Location
- Polska
A może masz ślizg łańcuch
- Joined
- Nov 20, 2001
- Messages
- 17,032
- Location
- Ely, England
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
