kickstart seal

I-pity-the-fool · Jun 29, 2007

Hey can anybody help me.
I'm a novice when it comes to Husabergs. I have an FS650 motard & the kickstart seal is leaking.
My local dealer gave me a new seal. What I want to know is, do you have to take the transmission cover off to replace it or can you just remove the kickstart & pop it out.
Just need to know how to do it & wheather I need to go grab a gasket for the trans cover.
Any help would be appreciated.

steve · Jun 30, 2007

You should have an O ring supplied as the new seal. Just remove the kickstart, and replace the O ring. It should be one of the simplest jobs to do on a Berg. Don't forget a little loctite on the kickstart bolt when reassembling.

Good Luck
Steve

Taffy · Jun 30, 2007

stab the old one 'harpoon like' with a bradawl or a scriber and fish it out.

regards

taffy

billinjah · Jun 30, 2007

ive got the same on my 470 i ordered a new seal and was told the cover was to come off is it just an o-ring in between cover and kicker then?

logjump · Jun 30, 2007

billinjah said:
is it just an o-ring in between cover and kicker then?

Yes!
Just press the new o-ring in place with something that isn't sharp.
As stated above, put a dab of lock-tite on the kickstarter bolt and it's also recommended to put anti-sieze on the splines on the shaft.

log

billinjah · Jun 30, 2007

well thats cool cheers!

kickstart seal

Help Support Husaberg:

I-pity-the-fool

steve

Taffy

billinjah

logjump

billinjah

Similar threads

Register CTA

Recent Discussions

Recent Discussions