impeller retaining circlip generic part number?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
B

basalt

Joined
Dec 10, 2012
Messages
114
Location
Woodland, ca
Is there a Napa or generic part number for the circlip that retains the impeller? Or perhaps just the dimensions?
54 0471 100010 SICHERUNGSRING DIN0471-10X1 CIRCLIP DIN0471-10X1

I tried having my local napa match it, and while they have boxes and boxes of circlips, they couldn't make any sense of the spare parts list information to match it.

Lastly, is it steel or something else? Cause it was super easy to bend into a useless shape!

Thanks
 
Well, according to the below links it seems it shouldn't have been any great mystery, but apparently it was. There is also a link to a cross-reference doc at the top of the linked page. Basically 10x1 means 10mm inner diameter and 1mm thickness. I think Din471 is the standard for the rest of the dimensions/features of the circlip.

DIN 471 External Retaining Ring | Fuller Metric Parts Ltd.

They apparently are steel as verified by a post here where someone fished a missing clip out of the engine with a magnet...

Turns out there is a KTM dealer just down the street from my work so I am headed there anyways!
 

Similar threads

K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
D
Dale E O's 2009 Idaho City 100 ride report
Replies
13
Views
3K
kzoo
K

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top