Hello , I am new to forum and think its best place to start solving my issue with recently 3 week ago bought Husaberg.
The problem is with the idle. When I bought it started well with the choke on and was running ok with choke on. Then when I went for a ride I could barely ride 1km when , while changing clutch bike wanted to stall. So when I was pulling clutch lever to maximum the bike just stalled in the middle of riding. I had to throttle it to keep it alive.
So I read that pilot jet might be the problem and as I didnt know the bike history it made sense- old petrol inside the tank etc.
I cleaned carb , and I couldnt see through pilot jet , so I cleaned it and put back together.
When I put carb back on a bike it didnt start at all. My friend then showed me the the thing- we took sparkplug and put a bit petrol inside the cylinder. Then started the bike. Bike now running but still with same issue. I have to throttle it to keep it running.
Screw under the carb is turned 2.5 turns. Running on 95 petrol
Hope I made any sense
Thanks in advance
Erik
The problem is with the idle. When I bought it started well with the choke on and was running ok with choke on. Then when I went for a ride I could barely ride 1km when , while changing clutch bike wanted to stall. So when I was pulling clutch lever to maximum the bike just stalled in the middle of riding. I had to throttle it to keep it alive.
So I read that pilot jet might be the problem and as I didnt know the bike history it made sense- old petrol inside the tank etc.
I cleaned carb , and I couldnt see through pilot jet , so I cleaned it and put back together.
When I put carb back on a bike it didnt start at all. My friend then showed me the the thing- we took sparkplug and put a bit petrol inside the cylinder. Then started the bike. Bike now running but still with same issue. I have to throttle it to keep it running.
Screw under the carb is turned 2.5 turns. Running on 95 petrol
Hope I made any sense
Thanks in advance
Erik
