So the stock FE390 headlight is dull..
$70 will fix that.
http://www.ebay.com/itm/15110017399...em=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr
3" hole saw in reverse direction... centered on the little circle on the middle of the lens. Then filed out enough to fit the projector
like a glove.
Low beam
high beam
Hooked up the halo to the running 12v wire on the bike.. whenever bike runs so does the halo
The brown wire on the left connector is the 12v acc power you want to tap into
All wired up, plug and play. The ballast +/- goes to the little running light power. The high beam wire goes to the high beam coil. The low beam wire is unused.
Really awesome light pattern.. should be perfect for road riding/singletrack. I had a Baja Designs Squadron on the Yamaha which was stupid bright but blinding for oncoming drivers and had a very tight hot spot, which made it bad for slow singletrack.
$70 will fix that.
http://www.ebay.com/itm/15110017399...em=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr
3" hole saw in reverse direction... centered on the little circle on the middle of the lens. Then filed out enough to fit the projector
like a glove.
Low beam
high beam
Hooked up the halo to the running 12v wire on the bike.. whenever bike runs so does the halo
The brown wire on the left connector is the 12v acc power you want to tap into
All wired up, plug and play. The ballast +/- goes to the little running light power. The high beam wire goes to the high beam coil. The low beam wire is unused.
Really awesome light pattern.. should be perfect for road riding/singletrack. I had a Baja Designs Squadron on the Yamaha which was stupid bright but blinding for oncoming drivers and had a very tight hot spot, which made it bad for slow singletrack.
As an eBay Associate we earn from qualifying purchases.
