Hi, all. I bought an 08 550 Berg to race the NORA/BSMC National series this year and done a couple of practices and 2 rounds on it already. Despite niggly problems (brake fade, oil leaks, slipper not slipping!) I can't help but think it's not the unreliable tractor it's made out to be! Loadsa questions to come and advice gonna be needed but for now i'll check out the forum and search facilities!!!
Help Support Husaberg:
- Joined
- May 28, 2011
- Messages
- 700
- Location
- Wisconsin, U.S.
I dont think the veiw counter is totally accurate.... it was probably a lot more than 40 
welcome to the crew, i think each berg is its own, some are good and some problematic, get your stuff sorted and keep up on maintenece and it will be as reliable as anything else....this coming from a guy whos bike is more than a decade older than yours and has been nothing but relaible even with its oil leaks.....
welcome to the crew, i think each berg is its own, some are good and some problematic, get your stuff sorted and keep up on maintenece and it will be as reliable as anything else....this coming from a guy whos bike is more than a decade older than yours and has been nothing but relaible even with its oil leaks.....
berger
Moderator
- Joined
- Apr 11, 2002
- Messages
- 3,152
- Location
- Phoenix Arizona
Howdy!
As far as compared to the older bergs the 08's are as reliable as a ball peen hammer when used for their intended purpose. When it comes to racing SM, I don't know that anything can be considered reliable anymore.
As far as the brakes and clutch, those are components that have likely been added to the bike. Not really sure you can knock the bike for that. As far as the oil leaks go, perhaps we could help with a little more info.
Welcome to the site. :cheers:
As far as compared to the older bergs the 08's are as reliable as a ball peen hammer when used for their intended purpose. When it comes to racing SM, I don't know that anything can be considered reliable anymore.
As far as the brakes and clutch, those are components that have likely been added to the bike. Not really sure you can knock the bike for that. As far as the oil leaks go, perhaps we could help with a little more info.
Welcome to the site. :cheers:
I've sorted the brake problem. I stripped and rebuilt the caliper and put some Motul RBF600 fluid in, all good now. Going to investigate the oil leaks as I have a few weeks break from racing. I've been told to give it a mid season main bearing refresh to be on the safe side. That's when all the questions will be coming as I may do it myself!!!
2nd time I've viewed your post... Btw, Hello. Nice bike. Keep us posted on your results. Both on the track and in the shop. I have an 01 fe650 that I've been sorting out and now becoming friends with. although it still wants to bite me it I'm too heavy handed. I'm interested in your main bearing freshen up as that is likely in my future.
Cheers
Cheers
- Joined
- Nov 20, 2001
- Messages
- 17,028
- Location
- Ely, England
the 550s are generally good. I would flick the seal back on the right behind the flywheel and see if you have roller mains. if you do I'd take (a small) chance and go to the end of the season. rollers on a 550: normally last forever!
regards
Taffy
regards
Taffy
A slightly belated mid season update! (only one more round to go!!)
Bikes been very quick and reliable, it had a mid season main bearing refresh courtesy of DCR and only had minor niggles so far...slipper clutch is now slipping correctly, turns out the stack height info provided was wrong, a thinner plate installed and now bob on. Currently looking for a top 10 finish in the NORA/BSMC National Championship, if I keep it rubber side up at the last round (Three Sisters, Wigan) then possibly 7th or 8th overall....
Need new footpegs after the last round, I ground the r/h peg half off!!!!
Bikes been very quick and reliable, it had a mid season main bearing refresh courtesy of DCR and only had minor niggles so far...slipper clutch is now slipping correctly, turns out the stack height info provided was wrong, a thinner plate installed and now bob on. Currently looking for a top 10 finish in the NORA/BSMC National Championship, if I keep it rubber side up at the last round (Three Sisters, Wigan) then possibly 7th or 8th overall....
Need new footpegs after the last round, I ground the r/h peg half off!!!!
Next (and final!) round is November 10/11 at Three Sisters. A great track for SMs with Lunar bend that goes on forever and a Tarmac tabletop!! There's racing both days and XP practice for anyone wanting to have a go without actually racing on the Saturday (£50).....
ACU seem to have very little input to the championship although we do need an ACU licence. I'm number #787, currently lying 12th overall but we get to drop our worst round so potential for a 5th to 8th place overall. Off the top of my head i'm 2nd place Berg rider :wink:
Season all done, finished 6th in the National Championship with a thrilling last meeting! Ups n downs (not literally, I managed to stay on for a whole weekend for only the 2nd time this year!!) and despite warping a plate or 2 in the last race my nearest rival had problems in race 2, a borrowed bike putting him back of the grid and so a steady mid pack finish (riding for the points!) left me with 6th overall for the season!
Next challenge, deciding whether the Berg is a keeper for next year or cross back to the orange side???!!! :? :?:
Next challenge, deciding whether the Berg is a keeper for next year or cross back to the orange side???!!! :? :?:
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
