Haynes Manual

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Taffy

Taffy

Joined
Nov 20, 2001
Messages
17,028
Location
Ely, England
I've just been in correspondence with Haynes the book publisher who make the workshop manuals for bikes. I was trying to persuade them to publish a book covering 2001-2008 bikes but alas it's not to be.

Here in the UK there are thought to have been less than 1,500 units sold and that just isn't enough to go ahead.

regards

Taffy
 
spencergt66 said:
whats wrong with the factory manual?
Click to expand...

basically the factory manual doesn't recognise any difficulties in carrying out the work or modifications that can reasonably be made. it also has all the torques, tolerances and wiring diagrams in the parts manuals and not in the workshop manual.

regards

Taffy
 
Since a Hayes manual isn't in the offing, how does one get a copy of the factory manual?
 
Taffy said:
spencergt66 said:
whats wrong with the factory manual?
Click to expand...

basically the factory manual doesn't recognise any difficulties in carrying out the work or modifications that can reasonably be made. it also has all the torques, tolerances and wiring diagrams in the parts manuals and not in the workshop manual.

regards

Taffy
Click to expand...

I have never had an issues with that all the info ands part numbers are all in the documents I have
 
Ruger said:
Since a Hayes manual isn't in the offing, how does one get a copy of the factory manual?
Click to expand...


You can buy one from the dealer or find them online some of the info can be downloaded for free right from the husaberg site (husaberg.com)
 
spencergt66 said:
Ruger said:
Since a Hayes manual isn't in the offing, how does one get a copy of the factory manual?
Click to expand...

You can buy one from the dealer or find them online some of the info can be downloaded for free right from the husaberg site (husaberg.com)
Click to expand...

The Husaberg site only has owners manuals and parts manuals, not service manuals, and there's nothing available for 2010 and 2011 models.
 
berg-parts.com I got the OE CD manual with everything you need to know and then some for 29? bucks I think it was. It covers the FE/FX/FS 390 450 570 the CD even has all the fault codes and trouble shooting for them in it
 
spencer

you're well off subject by now. this is about 2001-2008 mate? :roll: :roll:

the old bikes needed a lot of work and a book from Haynes for everybody (not just those here but people who have never heard of UHE and likely never will) would have been great.

let's not confuse the push button 'gimme's' of today with what we used to (and still do) have to ride.

regards

Taffy
 
Taffy said:
spencer

you're well off subject by now. this is about 2001-2008 mate? :roll: :roll:

the old bikes needed a lot of work and a book from Haynes for everybody (not just those here but people who have never heard of UHE and likely never will) would have been great.

let's not confuse the push button 'gimme's' of today with what we used to (and still do) have to ride.

regards

Taffy
Click to expand...


No you can take your pick I have both factory manuals and parts lists on cd as well as the hard copy's
 
we're both fluent Spencer - it's just they are two different languages! 8O :twisted: :twisted:

regards

Taffy
 
we're both fluent Spencer - it's just they are two different languages! 8O :twisted: :twisted:

regards

Taffy
 

Similar threads

F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
1
Views
420
rikschipp
R
K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
Robert J
New with my FE390 and some questions
Replies
11
Views
2K
Alan
Alan
Taffy
Taffmeisters - for sale
Replies
8
Views
2K
Spuddy18
S
K
Husaberg again
Replies
1
Views
1K
Khristi
K

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top