hardware left over from engine assembly

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I

Inhumaine

Joined
Mar 21, 2018
Messages
8
Location
Maine
2008 FE 550

Can anyone verify where the hardware in the two pictures belongs? I've just recently finished assembling the engine after it being apart for quite some time and cannont exactly remember where these pieces of hardware belong. I did follow the instruction manual very closely. (hopefully not inside the engine??!)

Thank you for anyone that recognizes

https://imgur.com/gallery/0KffaY1

https://imgur.com/gallery/0KffaY1
 
the thick one also was an early kickstart washer but you can't fit both. the O rings look like kickstart seal replacement O rings. swop out the seal for the O ring because it is better.

no idea the platic washer or in the other photo the strange allen screw and washers.

are you sure your best mate didn't visit? ....its what mates are for....

laid them on the washing machine and they vibrated off during the spin cycle into your box?

Taffy
 
Hahahaha you could be right!!! Been sitting strewn about my work bench for some time now between tear-down and rebuild... thank you for your time taffy. Cheers... ill put the engine back on the bike tonight.
 

Similar threads

K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
C
For Sale: 2008 FE 550 - Restored and Adventure-ready
Replies
0
Views
2K
canadius
C
C
For Sale 2008 FE 550 - Restored & Adventure-ready
Replies
0
Views
506
canadius
C
C
For Sale For Sale: 2008 FE 550 - Restored and Adventure-ready
Replies
1
Views
678
canadius
C
thorgan
'02 400 gearbox problems
Replies
6
Views
2K
Taffy
Taffy

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top