Hard clutch? Change oil?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
F

Finnar

Joined
Jun 1, 2009
Messages
64
Location
Norway
Hey

I have a hard clutch comparing to my friends Husaberg 650

Is it because of the hydraulic oil?

I have never changed it..
 
probably not, but servicing anything that needs serviced is a good thing.
 
this shouldn't happen? I don't think i have heard of this before????

regards

Taffy
 
What can be the problem then?

The problem is that the clutch handle is not so light as the other newer husaberg 650
 
the other newer husaberg 650
Click to expand...
the key perhaps lies in the fact that his is newer and thus has a different style clutch.
if it is a problem, lubricate all pivot points on the lever, make sure nothing is bent in the perch, if no help, pull off the slave cylinder, hold the plunger in place with your hand and gently pull the lever. it should be smooth. if all is well, then its in the clutch basket assy.
 

Similar threads

M
Husaberg fe350 clutch
Replies
1
Views
365
jojo09
J
Husa550Joe
Hi all, from Manchester England
Replies
0
Views
199
Husa550Joe
Husa550Joe
E
Bleeder Screw on Slave Cylinder won't open and needs to get replaced - Husaberg FE 390 2012
Replies
0
Views
255
eric.johnsson
E
R
Want To Buy 2010 FX450 stock clutch
Replies
4
Views
108
eeazye
E
C
Link to clutch master cylinder rebuild kit
Replies
2
Views
311
Connecticut_FE550
C

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top