Gear Lever Play

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
W

Whos-a-berg

Joined
Oct 8, 2004
Messages
22
Location
White Cliffs, Australia
Was having a look over the bike the other day and I noticed there is is a bit of back and forth play in the shaft the gear lever is attached to. Is this normal?
 
If the play is inward and outward on the shift shaft that sounds normal,if the play is front to back on the shift shaft it sounds excessive.Which model do you have?Nevertheless I will check my service literature and both my Husabergs and get back to you tomorrow.......nsman
 
Hi Whos-a-berg,1mm of play is excessive ,there is a bushing in the cover that supports the shaft and it must be showing wear on your engine....nsman
 
No it is not leaking at present. So can I get to this bushing through the clutch cover or do I have to remove the whole side cover? If it's not going to effect anythig to badly I might just leave it, cause it still changes gear easy enough.
 
You would have to remove the cover,if it still shifts fine and does not leak just keep checking it and keep riding ,its not doing any damage....nsman
 

Similar threads

o6550
550 Kickstarter issues during reassembly
Replies
11
Views
905
o6550
o6550
C
1998 husaberg 400 starter and gears.
Replies
1
Views
534
jojo09
J
C
Coolant in oil: Fe550 2008
Replies
19
Views
472
Connecticut_FE550
C
C
Balancer Shaft not moving past certain point. What next?
Replies
0
Views
207
Connecticut_FE550
C
mtpolino
For Sale 2009 570 FE w/ Subframe Tank
Replies
3
Views
717
FORDMOTO
F

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top