Fs 570 roll over sensor?

patlalonde · Oct 16, 2012

My husa stalls sometimes as landing stopies.
wondering if this roll over sensor located under the batterie housing could not be the cause.
and if their is any way to bypass that without affecting fi warning light.
at first , same probleme occured as oil from head cover vent filled intake with a lot of oil.I did buypass the vent hose up almlost to the handlebars and intake is now free of oil.a little smoky do Im thinking about to just add a pcv valve to the inlet in the filter box.

bike still stall sometimes on stoppies anybody please.

berglsmerg · Oct 17, 2012

Could it be that the fuel pump is pulling air while you are on the front wheel ? The fuel pump is located at the rear of the tank, if you are able to fillthe air box with oil from the breather hose then I would almost certainly say that the fuel pump is starving for fuel during your trick manoeuvre.

roberger · Oct 24, 2012

I have had one of these to bits to try to fix another problem ,( mine was a faulty start stop switch.)
You could open your roll sensor up , it is openable , it is a circuit board with a swinging weight , magnet effect type you could tape it down to one position , but it wouldn't function properly in a legit crash.

Fs 570 roll over sensor?

Help Support Husaberg:

patlalonde

berglsmerg

roberger

Similar threads

Register CTA

Recent Discussions

Recent Discussions