FE390-2010: Battery area pics

bergfe390 · Dec 25, 2013

Hi to all, this is my first post from Italy and it's because I've got a problem.
The bike is an FE390 my2010 (EU), and few months ago I completely removed the battery, the tank,the rear plastic chassis, cables and many other parts for a deep cleaning.
I'd to be sure the cables now are in the right position, because I think the seats doesnt lock properly.
Please can somebody take some pictures of the battery and cables just around it?
Is just to check if I properly mounted on all the components.
Thank you for your help and sorry for my bad english.
Happy Christmas.

Bergfe390

DeeG · Dec 25, 2013

Here are a few:

DeeG · Dec 25, 2013

Make sure all four seat hooks seat properly; two in the front, and two in the middle. It is common for these seats to squash out flat, and then it is hard to get all four hooks lined up. You can tell if they are locked in place by trying to lift the front of the seat and each side near the middle. If it is correctly mounted, it will be snug. If not, it will lift up.

To fix it, just put the seat on the ground on its side, then kneel on it and squeeze to make it narrow again.

bergfe390 · Dec 26, 2013

Thank you DeeG I apreciate.
The problem is when I mount the seat it properly fits: even If I try to lift it (front and middle) it's ok.
After a short ride, it lift up in front side.
I will also try to change the seat: I've got a couple.
Thank you again.
Bergfe390

FE390-2010: Battery area pics

Help Support Husaberg:

bergfe390

DeeG

DeeG

bergfe390

Similar threads

Register CTA

Recent Discussions

Recent Discussions