FE 400 battery connections

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 21, 2011
Messages
1
Location
Cambridge England
Hi All just joined! hoping for some ongoing help, advice and tips to keep my FE 400 03 running great!
I have one to start with, a bit embarrassing really! i replaced battery with new! but when re attaching the red wires to battery/ starter, i wasn't sure which way they went! i have the red wire from battery going into the fuse/?? thingy!!! and one coming out of there into the starter!
sorry for lack of technical detail, bit green with mechanical/electrical!!
so i was wondering if this was correct?
speedo comes on, engine cut switch fine, but lights/brake lights don't work!
Any enlightenment would be appreciated! :)
 
well they normally have a '+' or a '-' sign on the battery for a start. normally with the huseys the positive is on the right.

that should have a red lead to the solenoid and then one from the other side o0f the solenoid to the starter motor.

the back end of the battery in the bike should have a black lead that bolts up to the top chain roller bolt.

regards

Taffy
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top