dellorto mods?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 24, 2010
Messages
20
I just wanted to know am I missing out by not doing any of the delorto mods on my 501? For example the 4.5mm slide cutaway. The bike runs prime the way I have it set now and I hate to start over again.
 
If it runs good LEAVE IT ALONE!!! :D Don't forget to knock on wood :wink:

I think the slide cut away was for use with an LX1 cam and open exhaust.
 
Thanks for the tip! I have spent countless hours tuning the beast...but you know how it is if there is more power to be gained by an easy mod why not go for it :) But sometimes it is also better to just leave it alone.
 
Go look at that link to a thread that JoeUSA did on drilling the two holes. that should be good for a tuned Husaberg. why not come back and tell us how it goes for gawds sake as well!

regards

Taffy
 
HI
I have a FX470_01 to tune, so it should be close to yours.
Could you tell us whats your scret formula on the carb?

:cheers:
ZAGA
 
no secret formula 185mj, 35pj, K51 on C2, DR270, 45start jet and one and 3/4 of a turn on the fuel screw.

Anyone have a good link to the JoeUsa mod, the link on the carb setting in the owners doc does not seem to be working for me.
 
I never thought I'd say this but: I have just sorted the link. :D

regards

Taffy
 
Thanks Taffy the link worked perfect and after some reading it seems that I lack the proper tools to acomplish this job so I may have to take it somewhere to be done, or mabye I'll just give it a go using my diamond knife sharpner. And by the way this site is awsome!!!!
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top