- Joined
- Aug 31, 2012
- Messages
- 9
Putting the clutch back together on my '04 FE450, and the pushrod didn't seem to want to sit flush. If i pushed it hard enough it would go in, and the master cylinder would gargle!
So I removed the slave cylinder, and the piston popped out, with a small spring inserted into the back of it. I've checked the parts list, and I can't see a spring in there.
I removed the spring, resembled, bled, and it works a treat. Although, I had no problems before removing the clutch in the first place!
So, my question is; is the spring there for a reason, or has a previous owner put the spring there as a mod of some kind?
Apologies for no photos, but I just wanted to get it back together again!
So I removed the slave cylinder, and the piston popped out, with a small spring inserted into the back of it. I've checked the parts list, and I can't see a spring in there.
I removed the spring, resembled, bled, and it works a treat. Although, I had no problems before removing the clutch in the first place!
So, my question is; is the spring there for a reason, or has a previous owner put the spring there as a mod of some kind?
Apologies for no photos, but I just wanted to get it back together again!
