- Joined
- Apr 14, 2006
- Messages
- 12
This winter I haven`t used my Husaberg. So wen I was going to take it out from the garage not long time ago, I discovered that the clutch has lost it fluid (the clutch lever was 100% "loose"). The problem was a hole in the clutch line. So I bought a new line, and are now trying to fill on new fluid and bleed it. First I tryed with brake fluid, but then I read that this wasn`t recomended. So I tried automatic transmission fluid instead.
So I removed the reservoir cover and filled it upp with fluid, then i opened the nippel down att the engine with a 8mm. But the fluid will not bleed out. So I removed the line and filled it with fluid with a syringe, I also filled the nippel hole with the syringe. And then i mounted the line again. I don`t think there are much air in the system now, but when i put on the reservoir cover and try the clutch, there are NO reaction!
Anyone have any tips for me?
So I removed the reservoir cover and filled it upp with fluid, then i opened the nippel down att the engine with a 8mm. But the fluid will not bleed out. So I removed the line and filled it with fluid with a syringe, I also filled the nippel hole with the syringe. And then i mounted the line again. I don`t think there are much air in the system now, but when i put on the reservoir cover and try the clutch, there are NO reaction!
Anyone have any tips for me?
